Sanyo VCC-9684VA User Manual download pdf

SANYO Electric Co., Ltd.

Printed in China

1AC6P1P3265--

L5CJ2/US (1107KP-HS)

Français EspañolEnglish

VCC-9684VA

INSTRUCTION MANUAL

Color CCD Camera

PRECAUTIONS

■ In case of a problem

Do not use the unit if smoke or a strange odor comes from the unit,

or if it seems not to function correctly. Turn off the power

immediately and disconnect the power cord, and then consult your

dealer or an Authorized Sanyo Service Center.

■ Do not open or modify

Do not open the cabinet, as it may be dangerous and cause damage

to the unit. For repairs, consult your dealer or an Authorized Sanyo

Service Center.

■ Do not put objects inside the unit

Make sure that no metal objects or flammable substance get inside

the unit. If used with a foreign object inside, it could cause a fire, a

short-circuit or damage. Be careful to protect the unit from rain, sea

water, etc. If water or liquid gets inside the unit, turn off the power

immediately and disconnect the power cord, and then consult your

dealer or an Authorized Sanyo Service Center.

■ Be careful when handling the unit

To prevent damage, do not drop the unit or subject it to strong shock

or vibration.

■ Do not install this unit close to magnetic fields

The magnetic fields may result in unstable operation.

■ Protect from humidity and dust

To prevent damage, do not install the unit where there is greasy

smoke or steam, where the humidity may get too high, or where

there is a lot of dust.

■ Protect from high temperatures

Do not install close to stoves, or other heat sources, such as

spotlights, etc., or where it could be subject to direct sunlight, as this

could cause deformation, discoloration or other damages.

Be careful when installing close to the ceiling, in a kitchen or boiler

room, as the temperature may rise to high levels.

■ Cleaning

• Dirt can be removed from the cabinet by wiping it with a soft cloth.

To remove stains, wipe with a soft cloth moistened with a soft

detergent solution and wrung dry, then dry by wiping with a soft

cloth.

• Do not use benzine, thinner or other chemical products on the

cabinet, as this may cause deformation and paint peeling. Before

using a chemical cloth, make sure to read all accompanying

instructions. Make sure that no plastic or rubber material comes

into contact with the cabinet for a long period of time, as this may

cause damage or paint peeling.

Important

• Be careful when opening holes for installing the unit. Work with the

power and video cables pulled out for easy installation.

• Make sure to properly perform waterproofing for the ceiling or wall

where you are installing the unit.

• Make sure that the surface in the installation location has no

unevenness and is strong enough to bear the total weight of the unit.

• Install this unit in an environment where the temperature range stays

between -10°C and +50°C/14°F and 122°F (no condensation allowed).

• As a precaution against static electricity damage, touch a nearby metal

object (door knob, etc.) to dissipate static electricity in your body before

touching this unit.

INSTALLING BASE PLATE AND CONNECTIONS

GND

–

(A)

Open the base plate.

Point the arrow (↓) in the same

direction as the lens

orientation.

(A)

• Length: 35 mm/1.4 in. or more

• Diameter: 3.5 to 5.0 mm/0.1 to 0.2 in.

• Height of screw head:

5 mm/0.2 in. or less (washer included)

Make sure to tighten the screws properly.

Using screws of sizes other than specified may cause the unit to fall.

• When using an RG-59U (3C-2V) cable, do not let it

dangle in the air or attach it to piping.

• If you use a cable other than the types above, the

image or sync signal will be attenuated and will not

be transmitted correctly.

Place the base plate so that

the arrow points downward.

Monitor Connection

Power Supply Connection

b With AC 24 V b With DC 12 V

Check that +/- polarity is

correct.

For the connections, use cables thicker than 18 AWG.

Cable type Length

RG-59U (3C-2V) 250 m (273 yds) max.

RG-6U (5C-2V) 500 m (547 yds) max.

RG-11U (7C-2V) 600 m (656 yds) max.

& Reverse side

Push

(RED)

(BLACK)

(WHITE)

(BLACK)

(RED)

Ceiling Installed

Wall Installed

About this manual

Before installing and using the camera, please read this manual carefully.

Be sure to keep it handy for later reference.

Safety Guard

This installation should be made by a qualified service person and should

conform to all local codes.

Ceiling Installed Wall Installed

In-ceiling routingSurface routing*1

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT

OPERATING AND MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THIS UNIT.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

For the customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

Pour la clientèle canadienne

Cet appareil numerique de la Classe B est conforme à la norme

NMB-003 du Canada.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Changes or modifications not expressly approved by Sanyo may void the user's

authority to operate this camera.

*1 Surface routing

Cutout

Rib mark

SPECIFICATIONS

Scanning system : NTSC standard 525 lines, 60 fields/sec.

Image sensor : 1/4" interline transfer method CCD

Number of effective pixels : 768 (H) x 494 (V)

Horizontal resolution : 540 TV lines, typical

Minimum illumination

(approx.) : 0.5 lx (F0.95)

Video output : 1.0 V(p-p)/75 Ω, composite, BNC

UTP support (VA-10T: option board)

Video S/N ratio : More than 48 dB (AGC off: More than 50 dB)

Vari-focal lens : f=2.8 - 8 mm, F0.95 - 1.7

Rotation range : (On the ceiling) Pan: ± 100 degrees

Tilt: 0 - 90 degrees

(On the wall) Pan: ± 90 degrees

Tilt: 0 - 90 degrees

Backlight compensation : OFF, Multi-spot metering (High/Normal), Center zone

metering

White balance : ATW/Manual

Electronic shutter : 1/60, 1/100, 1/1000, 1/2000 sec.

Aperture compensation : Sharp/Normal

Sync system : Internal sync/Line-lock

Operating Environment : Temperature: –10°C – +50°C (14°F – 122°F)

Humidity: less than 90 % RH (no condensation)

Power supply : 24 V AC ±10%, 60 Hz / 12 - 15 V DC

Power consumption

(approx.) : 2.4 W

Weight (approx.) : 500 g (16 oz.)

Accessory : Screw ×1, Warranty ×1

Appearance and specifications are subject to change without prior notice

or obligations.

SERVICE

The camera is a precision instrument. Handle it carefully and always

follow the safety precautions. If the camera requires service, never

try to repair it yourself or open the casing.

For servicing, maintenance, or repairs, consult your dealer or an

Authorized Sanyo Service Center.

100 (4.0)

104 (4.2)

151 (6.0)

■ Dimensions

Unit: mm (inch)

L5CJ2_US(VCC-9684VA)(GB).fm 1 ページ２００７年１１月１４日　水曜日　午前１０時２２分

1 2

Summary of Contents

Page 1 - SPECIFICATIONS

SANYO Electric Co., Ltd.Printed in China1AC6P1P3265--L5CJ2/US (1107KP-HS)Français EspañolEnglishVCC-9684VAINSTRUCTION MANUALColor CCD CameraPRECAUTION

Page 2 - FrançaisEspañol English

FrançaisEspañol EnglishBAINSTALLATION ADJUSTING CAMERA IMAGEPreparation1 Remove the dome cover.PushInstalling on the Ceiling1 Connect the cables from

Comments to this Manuals

No comments

Sanyo VCC-9684VA User Manual

Browse online or download User Manual for Camera accessories Sanyo VCC-9684VA. Sanyo VCC-9684VA User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Camera accessories Sanyo VCC-9684VA