INSTRUCTION MANUALSystem ControllerVSP-3000About this manual• Before installing and using this unit, please read this manual carefully. Be sure to kee
Preparations9① ② ③ ④ ⑤① Power terminal (DC 12 V)Connect the accessory AC adapter to the DC terminal.② USB mouse port (USB)Connect the accessory USB ca
Preparations10Connecting to a Sanyo camera (Operation: P20)Monitor (sold separately)AC adapter (accessory)485A485BSIDE-ADome camera (sold separately)T
Preparations11Connecting to a Sanyo DVR (Operation: P28)Set the protocol to “SSP” for all of the cameras being connected. (Protocol setting: P21)A RS-
Preparations12Connection methodConnecting to a Sanyo DVR with a mouse function (Operation: P29)TCamera(sold separately)Camera(sold separately)Video in
Preparations13Main menu stepsPress the SUB MENU/MAIN MENU button.The MAIN MENU screen appears in the menu display and you are prompted to enter the pa
Preparations14Menu settings1Language settingThe only available language for menus is English. No setting is neccessary.When “ENGLISH” is displayed, pr
Preparations153Control ID settingIf using more than one system controller, change the addresses for each of them. The addresses can be assigned to a n
Preparations16Menu settings5Sleep settingYou can set the system controller to turn off automatically if it is not operated for a certain period of tim
Preparations177Backlight settingThis sets the brightness of the system controller’s menu display screen.(Default setting: OFF)1Move the joystick up or
Preparations18Menu settings9DVR link settingThe camera images from the DVR which is connected to the system controller switch in line with the camera
Introduction1IntroductionPrecautions ... 2Safety Cautions ...
Preparations1911Default settingThis returns all settings to the default settings that were in place at the time of shipment from the factory.1Move the
Preparations20Camera setup stepsWhile pressing the SHIFT/FUNC. button, press the SUB MENU/MAIN MENU button. “CAM SETUP001” will be displayed in the me
Preparations211Address settingThis selects the camera address.All settings other than this one will be applied to the selected address.(Default settin
Preparations22Camera settings3Baud rate settingThis sets the communication speed.(Default setting: 19.2 Kbps)1Move the joystick up or down to select “
Preparations235DVR address and channel settingThis assigns the DVR address and channel number to the selected camera.For details, refer to “Camera add
Operation24Camera operation buttonsJoystick:When in camera mode and a camera menu is not being displayed, this can be used to carry out pan, tilt and
Operation25FOCUS NEAR:Adjusts the focus to the nearest object.FOCUS FAR:Adjusts the focus to the furthest object.GO PRESET P:The camera will move to t
Operation26Camera operationsAuxiliary function operationTransmits AUX ON/OFF commands to the selected cameras.For details, refer to “List of auxiliary
Operation27Retrieving pan, sequence and tour operations recorded in a PTZ cameraYou can select preset pan, sequence and tour operations so that these
Operation28Switching the DVR screen displayThe only DVR function that can be operated from the system controller is the screen display switching funct
Introduction2PrecautionsFor UL UsersCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BAC
Operation291Press the mouse ( ) button.“MOUSE MODE” will be displayed, and you can then use the joystick to move the cursor.Camera operations cannot b
Others30List of auxiliary commands for Sanyo camerasThe commands are examples of commands for the VCC-9500/9600/9700/9800 series.Auxiliary commandON O
Others31Camera address numbers (default value)Camera addressConnected DVRConnected channel No.CAM No. DVR CH CAM No. DVR CH CAM No. DVR CH CAM No. DVR
Others32Communication format RS485, RS-422Keyboard 29 keysJoystick 3-axis joystick (pan / tilt / zoom)Control communication terminal Tx1, Tx2, Tx3, TR
SANYO Electric Co., Ltd.01GB_L8CSE_WA_VSP3000.indd 3301GB_L8CSE_WA_VSP3000.indd 33 2008/02/29 13:17:102008/02/29 13:17:10
Introduction3WARNINGNever use when unit emits smoke, unusual noises, or unusual smells.Using under these abnormal conditions can cause fires and elect
Introduction4CAUTIONTransport with careUnplug the AC adapter power plug from the outlet, confirm that connection cables are disconnected, and transpor
Introduction5Provided AC AdapterWARNINGUse only the provided AC adapterUse the provided AC adapter. Using a different AC adapter can cause fires or el
Introduction6Safety CautionsCAUTIONDo not connect to other equipmentThe provided AC adapter and power cable are exclusively for use with this unit. Co
Introduction7Main features AccessoriesYou can use the joystick to carry out pan, tilt and zoom operations for the camera.RS-485 communication cable ca
Preparations8①④ ⑥⑤⑧⑨② ③PWR Tx Rx⑩⑦DVR: Digital video recorder① Escape/Power button (ESC/PWR)ESC:This is used to exit from the current operating menu a
Comments to this Manuals