Sanyo DSR-C100 User Manual

INSTRUCTION MANUALMANUEL D’INSTRUCTIONSMANUAL DE INSTRUCCIONESDigital Recording CameraCaméra d’enregistrement numériqueCámara de grabación digitalDSR-

WARNING DISPLAYSThere is a caution indicator and a warning indicator on the front and back of the camera. These indicatorsoperate to notify you of the

Monitor displayIndicatorCamera statusWarningCaution(ON)Caution(OFF)FastflashesFastflashesOff4 When there is 20 minutes or less ofrecording time remai

INSTALLING AND HANDLINGTHE Ni-Cd BACKUP BATTERYThe Ni-Cd battery which is supplied with the camera is used as a backup power supply for the clock and

Installing the Ni-Cd battery1 Loosen the rear cover fixing screw (A) and openthe cover. (The screw cannot be removed fromthe cover.)2 Insert the batte

CONNECTIONSCarefully read the documentation which is provided with each of the components being connected.Be careful to connect components correctly,

Connection to a computerIf the camera is connected to a computer, you can then use the accessory application software to performoperations such as dat

HARD DISKHard disk recording areasThe camera records the images being viewed onto the hard disk.The hard disk is divided into six areas (1 ~ 4). The f

Protecting the hard diskWhen you have finished using the camera, set thehard disk to standby mode before turning off thepower. If the camera power is

FROM RECORDING TO PLAYBACKWhen using this camera for recording and playback for the first time, follow the steps given below. Refer tothe reference pa

HARD DISK STANDBY MODEWhen shooting or recording ends, switch the hard disk to standby mode.Setting to standby mode1 Press the MENU button.The MAIN ME

CONTENTSINFORMATION TO USER... 3PRECAUTIONS ... 4FEATURES ...

MEMO...

MENU SETTINGSL42A4/US (DSR-C100) GB 2001, 4, 16

MENU SETTINGSMenu screen display (MAIN MENU) RECORD START PLAYBACK SETTINGS CONDITIONMAIN MENU screen (SETTINGS) CLOCK SET SYST

SETTING THE CLOCK (CLOCK SET)You need to set the date and time in order to use the camera. The recording functions of this camera cannotbe used if the

SYSTEM SETTINGS (SYSTEM SET)Several different system settings can be made as indicated below. When these settings are made, the screendisplay appears

HARD DISK CAPACITY SETTINGS (HDD SET)Hard disk initialization settings are shown in Figure 1. This section explains how to change the hard diskrecordi

HARD DISK CAPACITY SETTINGS (HDD SET)Changing the alarm capacityAfter the hard disk has been initialized and whenno post-alarm images have yet been re

SUMMER TIME SETTINGS(SUMMER TIME/DAYLIGHT SET)Summer time settings include the time when summer time is to start and when it is to end. When summertim

SUMMER TIME SETTINGS(SUMMER TIME/DAYLIGHT SET)(End time setting)10 Use the CURSOR (j or l) button toselect “START”, and then use the CURSOR(d or c) bu

KEY WORD SETTING (KEY WORD SET)These settings are useful for identifying image data when transferring it to a computer. In addition, the keyword setti

ARCHIVE Playback ... 57EXTENSION Playback... 59FUNCTION OPERATIONS ... 61Function o

KEY WORD SETTING (KEY WORD SET)Entering a file ID (1 character)Example: To enter “P” as the file ID1 Use the CURSOR (j or l) button toselect “SETTINGS

Setting a camera ID (5 characters)Example: To set the camera ID to “HALL1”1 Use the CURSOR (l or j) button to select“SETTINGS” and then press the SETb

KEY WORD SETTING (KEY WORD SET)Entering a comments (up to 36 characters)Example: Entering “SANYO DIGITAL RECORDING CAMERA” as a comment1 Use the CURSO

Entering a password for deleting files (CHANGE PASSWORD(DELETE))This password is used when “DELETE” is selected from the FUNCTIONS screen during image

KEY WORD SETTING (KEY WORD SET)6 Use the CURSOR (l) button to select“END” and then press the SET button.The password (CAMERA) will appear as“öööööö” a

Setting a password for initializing the hard disk (CHANGE PASSWORD (INITIAL))This password is used when “INITIALIZE” is selected from the HDD SET scre

KEY WORD SETTING (KEY WORD SET)6 Use the CURSOR (l) button to select“END” and then press the SET button.The password (CMR) will appear as “ööö”and the

Correcting charactersThe following two character palettes are used:☞ For CAMERA ID and COMMENT settings☞ For PASSWORD or CAMERA ID settingExample: If

CHECKING THE CAMERA SETTING STATUSThe principal settings can be viewed on-screen. To check the settings, use the CURSOR (j or l) button toselect “COND

SETTING THE RECORDING METHODNote:•IlluminationThe shutter speed for this camera is setautomatically in accordance with the brightness ofthe object bei

INFORMATION TO USERSafety GuardTHIS SYMBOL INDICATES THATTHERE ARE IMPORTANT OPERATINGAND MAINTENANCE INSTRUCTIONSIN THE LITERATURE ACCOMPANYINGTHIS U

SETTING THE RECORDING METHODBefore using this camera, make sure that you set the current date and time. Recording will not bepossible if they have not

☞ Backup recordingIf there is 20 minutes or more of available recordingtime remaining in the post-alarm recording area ofthe hard disk after post-alar

SETTING THE RECORDING METHODPre-alarm recording flow1 Pre-alarm (PRE1) recording starts from10:00:00Images are stored to the pre-alarm recording area.

Screen displays1 Display during recording•During recording, the screen display will switch offafter 30 seconds have passed. You can make thescreen dis

SETTING THE RECORDING METHODPost-alarm recording1 Press the MENU button.The MAIN MENU screen will be displayed.2 Use the CURSOR (j or l) button to sel

Backup recordingIf there is 20 minutes or more of available recording time remaining in the post-alarm recording area of thehard disk after post-alarm

PRECAUTIONSIn case of problemsDo not use the camera if smoke or a strange odorcomes from the unit, or if it seems not to functioncorrectly. Disconnect

FEATURESEquipped with a 3.5-inch hard diskThe images are recorded directly to the camera’shard disk. The saved images can then bemanipulated using a C

PART NAMES AND FUNCTIONSFront panel1 Operation panel coverRemove this cover in order to use the MENUbutton and CURSOR button to operate thecamera.•Rem

PART NAMES AND FUNCTIONSFront Panel Rear Panel3 Camera mounting bracketThe camera mounting bracket is provided withmounting holes (1/4” – 20 UNC). At

Control terminals5 VIDEO OUT terminal (BNC plug)This terminal is used to connect the camera to acomponent such as a monitor or camera controlunit.6 RE