SC-X1801R INSTRUCTION MANUAL Vacuum Cleaner This SC-X1801R consist of vacuum cleaner SC-X1801 and handy cleaner SC-H24.
Handy Cleaner SC-H24 Introduction of Parts Switch; Press the “ ─ “side of the switch to start the motor. To stop the motor, press
Maintenance Caution Never insert the filter into the vacuum cleaner ,unless it is completely dry. Dust Disposal: Turn off the vacuum cleaner and
10 Care of filter: A severely soiled or clogged filter should be thoroughly washed with fresh tepid water. A neutral detergent could be used if r
Thank you for your purchase of a SANYO Vacuum Cleaner. Please read these instructions carefully before using this product and keep safe for fu
Precautions • Use only as described in this manual. Use only supplied attachments. • Do not leave appliance when plugged in. Unplug from outlet
2 • Before the first operation, make sure the dust cup is properly installed. • Do not use the machine without HEPA filter and motor protection filt
Vacuum Cleaner SC-X1801 3 Introduction of Parts 1 Power cord 2 Cord rewinding pedal 3 Handle 4 ON
Use Instructions 1. Connect the hose accessories; insert the hose end into the hose socket at the front cover and then hook it. Figure_1 Make s
Attention: To lock the front cover firmly, snick it softly until it sounds “Click” If the blockage is found in floor brush, hose or tubes and the
2. Clean Filters: HEPA filter; 1) Open the front cover: Press the buttons at the both side of socket hole and open it slowly. Figure_9,Figure_10 2)
Input power : 1800W Input voltage : 230-240V , 50Hz Protection class: class ll Power cord length: 5m Dust capacity : 2L
Comments to this Manuals