Sanyo TLS-9024P User Manual

INSTRUCTION MANUALTLS-9024PTime Lapse Video Cassette Recorder EnglishTime Lapse VideorecorderDeutschMagnétoscope time lapse à cassetteFrançaisVideogra

TYPES OF ON-SCREEN DISPLAYS AND DISPLAY SEQUENCENOTES:œ When a menu is displayed, recording will not bepossible.œ Press the SEARCH/AUDIO ON or MENU bu

SETTING THE LANGUAGE AND CLOCKLanguage SettingEnglish, French or German can be selected by the user.1 Turn the power on to all devices used.2 Press th

CHANGING THE ON-SCREEN DISPLAYSelecting the On-screen DisplayYou can select to display or not the date, time, thenumber of alarm recordings and tape s

VIDEO CASSETTE TAPESUse only video cassette tapes bearing the w logo.This VCR was primarily designed for use with E-180cassette tapes, it is recommend

VIDEO CASSETTE TAPESCorrect tape thread check functionIf the correct tape thread check function is on, after thecassette tape is loaded, a mechanism w

NORMAL RECORDINGNormal Recordingœ Turn the power on to all devices used.œ Load a cassette tape with erasure-prevention tab.œ Set the ON SCREEN switch

NORMAL RECORDINGConcerning the Number of Times Tapescan be Rerecorded onDepending on the recording speed mode, the tape mustbe replaced after a certai

NORMAL RECORDINGRecording CheckThe image being recorded can be checked.1 During recording, press the PLAY (REC CHECK)button.øThe tape will be rewound

AUTOREPEAT RECORDINGAutorepeat RecordingThe same tape can be recorded over many times.œ Follow the Before starting steps, under “NORMALRECORDING”.1 Se

ALARM RECORDINGBy connecting the ALARM IN terminal to a door switch,an interphone, etc., a recording can be done only whennecessary.Alarm Recording Se

PRECAUTIONSWARNING: TO REDUCE THE RISK OF FIRE ORELECTRIC SHOCK, DO NOT EXPOSE THISAPPLIANCE TO RAIN OR OTHER MOISTURE.To avoid electrical shock, do n

ALARM RECORDINGAlarm Recording Counter Displayœ During alarm recording, “AL” will be flashing on thedigital display.œ If the ON SCREEN switch is set t

ALARM RECORDINGAlarm SearchTo go to the beginning of a desired alarm recording.1 Press the SEARCH/AUDIO ON button during stopmode.ø“AL SEARCH 01” will

PROGRAMME TIMER RECORDINGThere are two programme timer recording methods,daily recording or recording on certain days of the week.Example 1: To record

PROGRAMME TIMER RECORDINGSetting the HolidaysBy setting the holidays, timer recording will beconducted on those days, as set for Sundays.1 Press the M

PROGRAMME TIMER RECORDING NOTES:œ During timer recording or timer recording stand-by,all the buttons on the VCR, except the TIMER buttonand the button

RECORDING USING AN EXTERNAL TIMERINPUTRecording can be controlled by an external start/stopsignal input at the EXT TIMER IN terminal.Example 2: To rec

NORMAL PLAYBACKNormal Playback1 Turn on the power to the VCR and TV monitor.2 Load the video cassette tape.3 Press the REC/PLAY SPEED l (or j) button

SPECIAL PLAYBACKPicture Search (Forward and Reverse)1 Turn the SHUTTLE ring clockwise (orcounterclockwise), during normal playback. See“SHUTTLE Ring O

SPECIAL PLAYBACKDay/Time Search1 Press the SEARCH/AUDIO ON button three timesduring stop mode.ø“T/D SEARCH 01 00:00” will be displayed onscreen.1H22M3

TAPE COUNTERUsing the counter, it is easy to find a desired recording.1 Press the COUNTER RESET button, at thebeginning of the desired recording.øThe

FEATURESœ JOG/SHUTTLE operationœ Can also be controlled through an RS-232C orRS-485 connectionœ Clog detectionœ High-speed Fast Forward/Rewindœ Field

SETTING THE BUZZERA buzzer can be set to sound during alarm recording, ifduring recording the tape reaches the end, if buttonsare pressed or if there

SETTING THE RS-232C OR RS-485 DATATRANSFER SPEEDThe VCR can be controlled by a computer connected tothe RS-232C connector. It can also be controlledth

SETTING THE RS-232C OR RS-485 DATA TRANSFER SPEEDRS485 RJ-11 connector layoutNOTE: Do not connect to phone line.Pin numberConnector AsignalConnector B

OUTPUT TERMINALSSW OUT TerminalWhen recording, a pulse signal is output at the SW OUTterminal.This terminal is usually connected to the switch input(S

OUTPUT TERMINALSREMOTE JackYou can use a VA-RMN01 Remote Control Unit (soldseparately) to control remotely the VCR.NOTE:œ The functions not available

MAINTENANCEDaily InspectionThe following daily inspections are recommended inorder to assure long-term and trouble-free operation ofthe unit.The daily

MAINTENANCEMaintaining and Checking The MechanismTo maintain the VCR functions and features working properly, and to avoid damages or dirt on the tape

TROUBLESHOOTING GUIDEIf the unit does not operate normally when you follow the instructions indicated in the manual, please refer to thetable below.SY

SPECIFICATIONSGeneral SpecificationsVideo heads system Dual-azimuth 4-head rotating helical scanning system: Dual azimuth 2-head for record and stand

SANYO Electric Co., Ltd.1AC6P1P1901–BARR4Q/EX2(1000KP-SY01) Issue No. 4 Copyright SANYO, 2000 All rights reserved. Printed in JapanRR4Q/EX2 (

LOCATIONS OF CONTROLS AND INDICATORSFront Panel1TIMER button2 COUNTER RESET button3 SHIFT ] or « (display position down or right) button4COUNTER MEMOR

LOCATIONS OF CONTROLS AND INDICATORSDigital Display1 Operation Indicatorsœ They display the actual operation mode.Operation Mode IndicatorRecord (REC)

LOCATIONS OF CONTROLS AND INDICATORSBack Panel1 RS485 A connector (RJ11 type)2 RS485 B connector (RJ11 type)3 DIP switchesœ Used when controlling the

CONNECTIONSConnect the video camera and monitor TV as shown in the figure below.NOTE: Before making the connections, make sure the devices are disconn

CONNECTIONSPower cord1 Plug the power cord (supplied) into the AC powerinput (AC IN ~) on the VCR back panel. Insert theplug straight and firmly.2 Ins

TYPES OF ON-SCREEN DISPLAYS ANDDISPLAY SEQUENCEReference pages are shown in square brackets.15-10-99 FRI 00015:20:00 3Set the ON SCREENswitch to the