Sanyo SRC-850 User Manual download pdf (Page 14)

NORMAL RECORDING

Action to Take when the Video Signal

Deteriorates

If there is no video signal during recording, fast forward,

rewind modes, when in stop mode or when a tape is not

loaded the menus are not displayed, “VIDEO LOSS” can

be displayed on-screen and a signal (0 V) can be output

at the ALARM OUT terminal. If in the (SET UP 5) menu

“WARN.OUT” is set to “V.LOSS” or “T OR V”, a signal

(0V) will output at the WARNING OUT terminal.

If in the (SET UP 3) menu, in the BUZZER section

WARNING is set to “Y”, the buzzer will be heard. To stop

the buzzer, press the STOP button.

1 Press the MENU button until the (SET UP 4) menu is

displayed.

@@@@@@@<SET@UP@4>

öALARM@MODE@@@@@@Y

öALARM@DURATION@@20S

öVIDEO@LOSS@@@@@@N

2 Press the ] button, until the “VIDEO LOSS” setting is

flashing.

3 Press the l (or j) button, to set the desired mode.

N . . . . . . . . . . The video loss warning is not

active.

Y . . . . . . . . . . The video loss warning is active.

4 Press the PAUSE/SEARCH button to save the

setting.

Tape Counter Notes:

•

There is no tape counter indication for the blank

portions of the tape.

•

The tape counter indicates real hours, minutes and

seconds.

•

There may be a slight discrepancy between the position

shown on the tape counter and the actual tape position.

•

When rewinding the tape past the “0:00:00” position, a

minus (–) sign will be displayed.

•

When the counter is displayed on the digital display

panel, press the COUNTER RESET button to reset it to

0:00:00.

NU4Q/U3 (SRC-850 GB) Mon. Aug., 23/1999

English

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 34 35

Comments to this Manuals

No comments

Sanyo SRC-850 User Manual Page 14

Comments to this Manuals