Sanyo PLC-SW35 User Manual download pdf (Page 36)

Video Input

To store the adjustment data, move the red frame pointer to the

Store icon and press the SELECT button. The Image Level Menu

will appear. Move the red frame pointer to the Image Level 1 to 4

and then press the SELECT button.

Image Level Menu

Move the red frame pointer

to an image icon to be set

and then press the SELECT

button.

Resets all adjustment to their previous figure.

Reset

Store

Closes the Image Adjust Menu.

Quit

Interlaced video signal can be displayed in a progressive picture.

Off . . . .Not activated.

L1 . . . . .Select “L1” for an active picture.

L2 . . . . .Select “L2” for a still picture.

Progressive

This function is effective on 3-2 pulldown video sources. With this

function On, the projector reproduces pictures faithful to the

original film quality.

Film

✔Note:

• Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is

selected. (p33)

• Film can only be activated when selecting NTSC and 480i for Video System and

L1/ L2 for Progressive.

• 3-2 Pulldown or Telecine transfer is the process of changing images from film mode

to video mode. While film runs at 24 frames per second (fps), NTSC television

signals (or video) have a run rate of 30fps so the 24 fps film needs to be speeded

up to 30fps and transferred using a proper field pattern to get the best film-like

images.

Store icon

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

No comments

Sanyo PLC-SW35 User Manual Page 36