Sanyo PLC-XL45 User Manual download pdf (Page 18)

Connect the projector’s AC power cord into an AC

outlet. The POWER indicator turns red.

Press the POWER ON-OFF button on the top control

or on the remote control. The POWER indicator

becomes green and the cooling fans start to operate.

The preparation display appears on the screen and the

count down starts.

The preparation display disappears after 30 seconds.

After the countdown, the input source that was

selected the last time and the Lamp mode status icon

(see page 46) will appear on the screen.

If the projector is locked with a PIN code, a PIN code

Input Dialog Box appears. Enter the PIN code as

instructed below.

See page 46 for the Lamp mode.

Selected Input Source and Lamp Mode

Complete peripheral connections (with a computer,

VCR, etc.) before turning on the projector.

Lamp mode

After the OK icon

disappears, you can

operate the projector.

PIN Code Input Dialog Box

Turning On the Projector

Basic Operation

Enter a PIN code

Select a number by pressing the Point ed buttons, and

then press the Point 8 button to fix the number and move

the pointer. The number changes to "✳". If you fixed an

incorrect number, move the pointer to the number you want

to correct by pressing the Point 7 button, and then select

the correct number by pressing the Point ed buttons.

Repeat this step to complete entering a four-digit number.

"1234" is set as the initial PIN code at the factory.

After entering the four-digit number, move the pointer to

"Set" by pressing the Point 8 button. Press the SELECT

button so that you can start to operate the projector.

If you entered an incorrect PIN code, "PIN code" and the

number (✳✳✳✳) turns red. Enter the correct PIN code all

over again.

What is PIN code?

PIN (Personal Identification Number) code is a security

code that allows the person who knows it to operate the

projector. Setting the PIN code prevents unauthorized use

of the projector.

A PIN code consists of a four-digit number. Refer to the PIN

code lock function in the Setting Menu on pages 47–48 for

locking operation of the projector with your PIN code.

✔Note:

• When the Input Search function is set on

On1 or On2, the input signal will be searched

automatically (p.45).

• When the Logo select function is "Off,” the

logo will not be displayed on the screen

(p.42).

• When the "Countdown off" or "Off" is selected

in the Display function, the countdown will

not be shown on the screen (p.41).

• During the countdown period, all operations

are invalid.

• If the correct PIN code number is not entered

for 3 minutes after the PIN code dialog box

appeared, the projector will be turned off

automatically.

CAUTION ON HANDLING THE PIN CODE

If you forget your PIN code, the projector can no

longer be started. Take a special care in setting a

new PIN code; write down the number in a column

on page 64 of this manual and keep it at hand.

Should the PIN code be missing or forgotten,

consult your dealer or service center.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 64 65

Comments to this Manuals

No comments

Sanyo PLC-XL45 User Manual Page 18

Comments to this Manuals

Related products and manuals for Data projectors Sanyo PLC-XL45