Sanyo PLC-XTC50AL User Manual download pdf (Page 55)

Setting

Display

This function decides whether to display On-Screen Displays.

On ............................ Show all the On-Screen displays. Use

this function when you want to project

images after the lamp becomes bright

enough. The factory default setting is

in this option.

Countdown Off ........ Show the input image instead of

the countdown when turning on the

projector. Use this function when you

want to project the image as early as

possible even when the lamp is not

bright enough.

Off ........................... Hide the On-Screen Displays except;

lOn-Screen Menu

l“Power off?” (p.25)

l“No signal” for Power management

(p.56)

l“Please wait ...”

lArrows for panning mode(p.47)

Display

Use the Point 7 8 buttons to

switch between the options.

Standby mode

This function is available when operating the projector via

network.

Eco............. Select “Eco” when you do not use the projector

via network. The projector’s network function

will stop when turning off the projector.

Network ....... Supply the power to the network function

even after turning off the projector. You can

turn on/off the projector via network, modify

network environment, and receive an e-mail

about projector status while the projector is

powered off.

✔Note:

 •Whenselecting“Network”,thecooling

fansmayberunningdependingonthe

temperatureinsidetheprojectoreven

iftheprojectoristurnedoff.

 •When“Eco”isselected,several

functionswillberestricted.(pp.17,20-

22,54)

• When“Eco”isselected,allofthe

infraredremotereceiversareactivated

regardlessoftheRCsensorsetting.

Theprojectormaybeeffectedthe

noiseofthefluorescentlightandso

on.

• When“Eco”isselected,itisonly

possibletoturnontheprojectorwhile

usingtheRS-232Cserialport.

Power management

Time left before the lamp is off.

For reducing power consumption as well as maintaining the lamp

life, the Power management function turns off the projection lamp

when the projector is not used for a certain period.

If the input signal is interrupted and no button is pressed for more

than 30 seconds, the timer display with “No signal” appears. It

starts the countdown until the lamp is turned off. The countdown

time can be set between 1–30 minutes. Use the Point 7 8

buttons to set the countdown timer.

Power management

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 84 85

Comments to this Manuals

No comments

Sanyo PLC-XTC50AL User Manual Page 55

Comments to this Manuals

Related products and manuals for Data projectors Sanyo PLC-XTC50AL