Sanyo CE32LD17E-B User Manual download pdf (Page 10)

English - 9 -

outputs of your device to enable component audio.

S/PDIF Coaxial Out5. outputs digital audio signals of the currently watched source.

Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input

RF Input6. connects to an aerial antenna system.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device

to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

PC Input7. is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC

HDMI 1: HDMI Input8.

HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of

displaying High Deﬁ nition pictures from devices such as a High Deﬁ nition Satellite Receiver or DVD

Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets

can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI

connection.

HDMI 2: HDMI Input9.

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the 1.

channels that you subscribe to. For more information, see “Conditional Access”

section.

Side USBs2.

Headphone jack is used for connecting an external headphone to the system. 3.

Connect to the HEADPHONE jack to listen to the TV from headphones .

Side audio-video connection4. input is used for connecting video and audio

signals of external devices. To make a video connection, you must use the

supplied AV connection cable for enabling connection. First, plug singular jack of

the cable to the TV’s Side AV socket. Afterwards, insert your video cable’s (not

supplied) connector into the YELLOW input (located on the plural side) of the

supplied AV connection cable. Colours of the connected jacks should match.

To enable audio connection, you must use RED and WHITE inputs of the side

AV connection cable. Afterwards, insert your device’s audio cable’s connectors

into the RED and WHITE jack of the supplied side AV connection cable. Colours

of the connected jacks should match.

Note: You should use audio inputs of side AV connection cable (RED & WHITE)

to enable sound connection when connecting a device to your TV by using PC or COMPONENT

VIDEO input.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the •

mains. Plug the power cable to the mains socket outlet.

Aerial Connection

Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.•

A01_MB61_[GB]_3920UK_IDTV_BRONZE16_32917LED_10069609_50173868.indd 9A01_MB61_[GB]_3920UK_IDTV_BRONZE16_32917LED_10069609_50173868.indd 9 08.11.2010 10:50:1008.11.2010 10:50:10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

Comments to this Manuals

No comments

Sanyo CE32LD17E-B User Manual Page 10

Comments to this Manuals

Related products and manuals for LCD TVs Sanyo CE32LD17E-B