Sanyo CH1872 User Manual Page 71
- Page / 111
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
11
Using the Remote Control Unit (continued)
How to Use the Remote
Control Unit
When using the remote control unit, always point the unit’s transmitter head
directly at the air conditioner’s receiver.
Remote Control Unit
Installation Position
The remote control unit may be operated either from a non-fixed position or from
a wall-mounted position. To ensure that the air conditioner operates correctly, DO
NOT install the remote control unit in the following places:
DO NOT • In direct sunlight
• Behind a curtain or other places where it is covered
• More than 26 feet (8 m) away from the air conditioner
• In the path of the air conditioner’s airstream
• Where it may become extremely hot or cold
• Where it may be subject to electrical or magnetic noise
• Where there is an obstacle between the remote control unit and air
conditioner (since a check signal is sent from the remote control unit every 5
minutes)
Mounting the Remote Control
Unit
Before mounting the remote control unit, press the ON/OFF operation button at
the mounting location to make sure that the air conditioner operates from that
location. The indoor unit should make a beeping sound to indicate that it has
received the signal.
To take out the remote control unit, pull it forward.
When Holding the Remote
Control Unit
• When using the remote control unit and during air conditioner operation, the
transmitter on the remote control unit should be pointed toward the receiver
on the indoor unit.
• Make sure that there are no objects between the remote control unit and
receiver which could block the signal.
Air conditioner
(Indoor unit)
Receiver
Remote control
unit
(Transmitter head)
Remote control
unit mount
Mounting screws
5/32 x 5/8" (4 x 16 mm)
(included)
R
ear s
id
e
Hole
• To prevent loss of the remote control unit,
you can connect the remote control unit to
the mount by passing a string through the
remote control unit and attachment hole.
Press
Set in
place
OI-801-11EG
01_KHS1872_EN.fm Page 11 Monday, July 9, 2007 3:05 PM
- KHS1872 + CH1872 1
- KHS2472 + CH2472 1
- Important! 2
- Please Read Before Starting 2
- Table of Contents 3
- 1. OPERATING RANGE 5
- 2. SPECIFICATIONS 6
- Indoor Unit KHS1872 7
- Outdoor Unit CH1872 7
- < 208V > 7
- < 230V > 8
- 2-2-1. Indoor Unit 10
- Indoor Unit KHS2472 11
- 2-2-2. Outdoor Unit 12
- Outdoor Unit CH2472 13
- 3. DIMENSIONAL DATA 15
- Outdoor Unit CH1872 16
- Outdoor Unit CH2472 17
- 4. REFRIGERANT FLOW DIAGRAM 18
- 5. PERFORMANCE DATA 19
- Indoor air temp.73 20
- Hi FanLo fan 21
- Indoor air temp.73°F ( 22
- 5-2. Cooling Capacity 23
- Indoor Unit : KHS2472 24
- Outdoor Unit : CH2472 24
- < Cooling Capacity > 24
- Indoor Unit : KHS1872 25
- Outdoor Unit : CH1872 25
- 5-4. Heating Capacity 27
- °F (21.1°C) 29
- Indoor Unit KHS1872 29
- Indoor Unit KHS2472 30
- 6. ELECTRICAL DATA 31
- Indoor Unit 32
- Outdoor Unit 32
- Indoor Unit KHS1872 KHS2472 33
- 7. MAINTENANCE 36
- Pull the cover upward 37
- 8. FUNCTIONS 38
- HIGH POWER 39
- NIGHT SETBACK 39
- Lamp colors 39
- Timer backup 39
- 8-2. Protective Functions 40
- Defrost detection and release 41
- 9. TROUBLESHOOTING 42
- (1) Checking the indoor unit 45
- (2) Checking the outdoor unit 45
- (3) (2) (1) 46
- Defect in the outdoor unit 47
- P. C. board 47
- Defect or connection error 47
- (3-2) Condition: E12 48
- 9-4-1. Indoor Fan Motor 49
- 9-4-2. Outdoor Fan Motor 50
- (1) Noise malfunction 51
- Resistance 52
- PCB Ass'y 53
- 11. REFRIGERANT R410A: 54
- INSTRUCTION MANUAL 61
- APPENDIX A 61
- Features 62
- Contents 63
- Product Information 63
- Alert Symbols 63
- Installation Location 64
- Electrical Requirements 64
- Safety Instructions 64
- Names of Parts 65
- OI-801-6-EG 66
- Remote Control Unit (Display) 67
- Remote Control Unit 68
- OI-801-9EG 69
- Using the Remote Control Unit 70
- OI-801-11EG 71
- 1. Automatic Operation 72
- 2. Manual Operation 73
- 3. Adjusting the Fan Speed 74
- 4. Fan Only 74
- 5. Night Setback Mode 75
- 76
- 6. QUIET Mode 76
- 7. HIGH POWER Mode 76
- 8. ION Mode 76
- Special Remarks 77
- Setting the Timer 78
- 3. How to set the ON time 79
- 4. How to set DAILY ON/OFF 79
- REPEAT timer 79
- Using the 1-Hour OFF Timer 80
- Tips for Energy Saving 80
- OI-801-21EG 81
- Operation without the Remote 82
- Control Unit 82
- Care and Cleaning 82
- Care and Cleaning (continued) 83
- Troubleshooting 85
- Operating Range 85
- INSTALLATION INSTRUCTIONS 86
- APPENDIX B 86
- INSTALLATION INSTRUCTIONS 87
- SPECIAL PRECAUTIONS 88
- 1. General 89
- About 4" (10 cm) 91
- About 1'4" (40 cm) 91
- About 6" (15 cm) 91
- Rear panel 92
- 3/16" 93
- (4.8 mm) dia. hole 93
- Rawl plug 93
- Power supply 96
- Single phase 230/208V 60HZ 96
- Terminal Terminal 96
- Strip 15/16" (25 mm) 98
- Strip 3/8" (10 mm) 98
- Padding material 99
- 5. Refrigerant Tubing 103
- Insulated tubes 104
- Apply putty here 104
- 6. Air Purging 105
- QUIET lamp 107
- ION lamp 107
- OPERATION lamp 107
- TIMER lamp 107
- Pump Down 108
- 8. Address Switch 110
Related products and manuals for Mobile air conditioners Sanyo CH1872
(24 pages)
(50 pages)© 2020, manymanuals.com. All rights reserved. | 0.456 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals