Sanyo PJ MASTER POA-PJNM01 User Manual download pdf (Page 38)

Chapter 3 Basic operation

Reading of alert log

Displays the alert logs. Records the information when the alert occurs and is canceled.

Select Alert from Display - Log menu or click button on the tool bar.

Before executing the Alert Log command, ﬁrst select a top server, a sub server or a target. The alert

logs on the selected server or target will be displayed on the alert log screen window.

If there is the alert item on the target or server in the network, the alert information is indicated as

follows;

Value indicated with red : Alert occurred

Value indicated with green : Status changed

Value indicated with blue : Alert has been resolved

Item Description

Server Name The name of the server which manages the target which had an alert.

Target Name The name of the target which had an alert.

Power Status Status of the network equipment (Power-on, StandBy, Cooling, CountDown, etc.)

Lamp Status Status of lamp (On, Off, Error, Replace, indicated with lamp1, lamp2, lamp3, lamp4

sequentially)

Input Signal Name of input signal (Analog, Digital, S-Video, Video, Y/Cr/Cb, Y/Pr/Pb, etc.)

Input Status Status of input signal (On, Off, Interrupted)

Input Select Displays input mode (1,2,3 etc)

Network Status Status of network connection (Disconnect, Connect)

Temperature A Displays inside temperature A of the equipment (in Celsius or Fahrenheit)

Temperature B Displays inside temperature B of the equipment (in Celsius or Fahrenheit)

Temperature C Displays inside temperature C of the equipment (in Celsius or Fahrenheit)

Lamp Time Displays lamp use time (lamp1, lamp2, lamp3, lamp4)

IP Address Displays IP address of the equipment

Model Name Displays model name of the equipment

Projector Time Displays accumulated projector use time

PJ-Net Ver. Displays the version of the Network Board ﬁrmware or PJ Master

PJ Ver. Displays the ﬁrmware version of the projector

Execute Date Displays the aleart occured date

* In the csv ﬁle, information which alert occurred is indicated with @, information which alert has been

resolved is indicated with # and information which status changed is indicated with *.

* The alert log of the last selected target or server will be displayed when selecting multiple targets or servers.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 53 54

No comments

Sanyo PJ MASTER POA-PJNM01 User Manual Page 38