Sanyo PLC-SU51 User Manual download pdf (Page 29)

Computer Input

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to

your computer. Auto PC Adjustment function can be operated as follows.

Move the red frame pointer to

the Auto PC Adj. icon and

press the SELECT button.

PC Adjust Menu

PC Adjust Menu icon

To store adjustment parameters

Adjustment parameters from Auto PC Adjustment can be

memorized in this projector. Once parameters are memorized, the

setting can be done just by selecting Mode in the PC System

Menu (p28). See “Store” on page 31.

✔Note:

• Fine sync, Total dots and Picture Position of some computers can not be fully

adjusted with this Auto PC Adjustment function. When the image is not provided

properly with this operation, manual adjustments are required. (p30, 31)

• The Auto PC Adj. cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i,

or 1080i is selected in the PC System Menu(p28), or when the signal is coming

from DVI-terminal.

Auto PC Adjustment

Press the MENU button to display the On-Screen Menu.

Press the Point

7 8 button to move the red frame pointer to

PC Adjust Menu icon.

Press the Point d button to move the red frame pointer to

Auto PC Adj. icon and then press the SELECT button twice.

This Auto PC Adjustment can be also executed by pressing

the Auto PC button on the remote control unit.

Auto PC Adj.

Computer Input

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 63 64

No comments

Sanyo PLC-SU51 User Manual Page 29