Sanyo DS25520 User Manual download pdf (Page 12)

ADDING OR DELETING CHANNELS

1. Press MENU key.

2. Use the ▲ /▼ keys to highlight CH. Scan Memory.

3. Press the + key to highlight channel number entry area.

4. Enter the channel number you want to add or delete (example): C34. For cable channels

above 99, press and hold the 1 key until C1– – appears. Then enter the other two numbers.

5. Press the

+ key to change the present setting. Example: Added will change to Deleted.

This takes about three seconds. During that

time, the word “Added” or “Deleted” will

become yellow.

6. Use the 0~9 or ▲▼ keys to choose other

channels to delete or add, or press the

MENU key to exit.

QuickTips

■

Channels deleted from

scan memory can be

selected with the

number keys.

■

Restoring deleted

channels, use the

on-screen menu to

manually add channels

or start CH. (Channel)

Search from the menu.

It may take a few

minutes to search thru

the available channels.

■

Press the RESET

key twice.

■

If Caption Text mode is

selected and NO

captioned text is broad-

casted, a black box

may appear and

remain on the TV

screen as shown

below.

To remove this black

box, set captioning to

any mode other than

Text1 or Text2 or press

the RESET key to

cancel captioning and

other customized

settings.

■

Channel number will

not display continu-

ously when captioning

is on.

Need help?

Visit our Web site at

www.sanyoctv.com

or Call 1-800-877-5032

Menu Language

▲▲

▼▼

CH. Scan Memory

Deleted

CAPTION1: This is the main mode used for program captioning (words

match the program you are watching). These captions are generally one or

two lines.

CAPTION2: This is an alternative mode for program captioning.

Caption2 may be used by the broadcaster to provide captions in another

language, such as, Spanish or French.

TEXT1: This mode is used to display large amounts of text. This text will

appear within a black box that may be nearly as large as the TV screen.

Text displayed in this manner does not generally relate to the program.

These captions may be used by broadcasters to provide weather reports,

community bulletins, etc.

TEXT2: This is an alternative mode used to display large amounts of text

same as Text1.

QUIKCAP: Quikcap allows captions to toggle on and off with the Mute function. Press the

MUTE key on the remote control to block the TV sound; the captions display automatically.

Press the MUTE key again to restore the sound, the captions will disappear. Quikcap displays

program captions in the Caption1 mode.

SETTING CAPTIONS

1. Press the Caption key on the remote control.

2. Press the 0 key to select options: OFF, CAPTION1, CAPTION2, TEXT1, TEXT2, or

QUIKCAP.

TWO OUTS AND TWO STRIKES

Caption1/ 2

TONIGHT: BECOMING MOSTLY

CLOUDY WITH A 40 PERCENT

CHANCE OF RAIN. COLD WITH

A LOW IN THE UPPER 30's WEST

WIND AROUND 20 MPH, SHIFT-

ING TO NORTHWEST AROUND

MIDNIGHT. FRIDAY: MOSTLY

CLOUDY AND COLDER WITH

A 50 PERCENT CHANCE OF

RAIN. HIGH IN THE MID 50's.

Text1/ 2

CLOSED-CAPTIONING

Captioning is text information transmitted along with the picture and sound so it can be dis-

played on the TV screen. Because different types of captions can be transmitted with the TV

signal, separate captioning modes are provided. The captioning modes recognized by this

model are: Caption1, Caption2, Text1, and Text2. Local broadcasters decide which caption

signals to transmit.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Comments to this Manuals

No comments

Sanyo DS25520 User Manual Page 12

Comments to this Manuals

Related products and manuals for Televisions Sanyo DS25520