Sanyo PLC-XP55L (Lensless) User Manual download pdf (Page 25)

COMPUTER INPUT

PC ADJUSTMENT

AUTO PC ADJUSTMENT

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your

computer. Auto PC Adjustment function can be operated as follows.

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to PC

ADJUST Menu icon.

Press POINT UP/DOWN button to move a red frame pointer to

AUTO PC Adj. icon and then press SELECT button.

This Auto PC Adjustment can be also executed by pressing

AUTO PC ADJ. button on Top Control or on Remote Control

Unit.

PC ADJUST MENU

Auto PC Adj.

Store adjustment parameters.

Adjustment parameters from Auto PC Adjustment can be memorized

in this projector. Once parameters are memorized, setting can be

done just by selecting Mode in PC SYSTEM Menu (P24). Refer to

step 3 of MANUAL PC ADJUSTMENT section (P27).

NOTE

● Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment

function. When image is not provided properly through this function, manual adjustments are required. (Refer to page 26,

27.)

● Auto PC Adjustment function cannot be operated in Digital Signal input on DVI terminal and “480p”, “575p”, “480i”, “575i”

“720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu.

PC ADJUST Menu icon

Move a red frame pointer to AUTO

PC Adj. icon and press SELECT

button.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 55 56

No comments

Sanyo PLC-XP55L (Lensless) User Manual Page 25