Sanyo VCC-WB2000P User Manual download pdf (Page 8)

Attaching the Lens

Use a DC-type automatic iris-type lens (sold separately).

Remove the lens mount cap.

Attach the CS mount-type lens.

Note:

The “L” part of the lens

should be 5 mm or less in

length. If a lens that does not

conform to this standard is

used, it will not be possible to

attach the lens correctly.

Gently screw the lens into the camera.

The following automatic iris-type lenses can

be used.

•

VCL-CS8LY (standard, f = 8 mm)

•

VCL-CS4LY (wide angle, f = 4 mm)

•

VCL-CS2LY (extra wide angle, f = 2.8 mm)

For C mount type

In order to allow correct adjustment of the flange

back, attach the C mount adapter ring (option) to

the lens before attaching the lens to the camera.

Connect the lens iris plug to the lens iris

output connector of the camera.

Lenses from other manufacturers may have

different plug shapes and specifications. In

such cases, you may need to rewire the lens

iris plug.

(–) control coil

(+) drive coil

(+) control coil

(–) drive coil

(Connecting to the lens iris plug)

1 Cut off the plug of the lens cable, cut off

approximately 8 mm of the insulation, and

then strip the ends of the cable sheaths

leaving approximately 6 mm of sheath intact.

2 Solder the ends of the cable wires to the

ends of the pins, and then attach the cover of

the lens iris plug.

English

– 7 –

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Comments to this Manuals

No comments

Sanyo VCC-WB2000P User Manual Page 8

Comments to this Manuals

Related products and manuals for Video surveillance systems Sanyo VCC-WB2000P