Sanyo VPC-T1060 User Manual download pdf (Page 20)

EN-19

CAPTURE MODE

Capturing Images

Your camera is equipped with a 2.8" full color TFT LCD monitor to help you compose

images, playback recorded images/video clips or adjust menu settings.

1. Press the button to turn the power on.

 The status LED lights green and the camera is initiated.

 If the power is turned on in [ ] or [ ] mode, the lens will extend forward and it

is ready for shooting. In both modes, if the camera mode is changed to [ ], the

lens barrel will retract into the camera body after 30 seconds.

2. Set the button to [ ].

3. Compose your image in the LCD monitor.

 Turn the zoom lever to side to zoom in on the subject, and enlarges the

subject on the LCD monitor.

 Turn the zoom lever to side to zoom out on the subject, and provides a

wider angle image.

4. Press the shutter button.



Pressing the shutter button down halfway

automatically focuses and adjusts the

exposure, and pressing the shutter button

down fully captures the images.

 The focus area frame turns green when the

camera is in focus and the exposure is

calculated.

 When the focus or exposure is not suitable,

the frame of the focus area turns red.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 46 47

No comments

Sanyo VPC-T1060 User Manual Page 20