Sanyo CE42LE1 User Manual download pdf (Page 7)

Press the MENU button and select Sound using the

buttons, press the1 button to enter.

Select and adjust to obtain the best sound settings for your

environment using the

and 1 2 buttons.

Press the MENU button to return to Main Menu. These settings

automatically store when you exit the menu.Press the MENU button

to exit menu.

■ OSD Language

Use the 1 or 2 button to select the prefered OSD language

(French, German, Italian, Spanish, Dutch). Press the MENU button to

exit

■ AV2 setting

In setting menu, to select AV2 press the d button and set to Y,Pb,Pr

or RGB, H/V depending on your external equipment.

1. Press the MENU button. Select Setting using the e or d button

press the 1 button to enter.

2. Select AV2 setting using the e or d button.

3. Press the 1 or 2 button to select either Y,Pb,Pr or RGB

H/V.

4. Press the MENU button to exit, this automatically stores your

changes.

5. Press the MENU button to exit.

■ Off-timer setting

The Off timer will switch the monitor into the standby mode when the

selected time has elapsed.

1. Press the MENU button. Select Setting using the e or d button

press the 1 button to enter.

2. Select Timer using the e or d button, press 1 button to enter.

3. Press the 1 or 2button to change time.

The time changes in 5 minute steps.The maximum time is 120 min-

utes.

If you have set the off timer, a count down display appears in the

corner of the screen when the recall button is pressed.

✐ If the monitor is switched off by the standby button

on the

remote control or by the standby switch

on the bottom of the

LCD monitor the timer settings will be cancelled.

Connect your PC to either PC-IN or RGBHV or DVI on the rear of the

set. Once connected select PC mode or AV2 (RGBHV, see page 4

for AV2 input settings)or DVI via the v button on your remote

control. The set will become a monitor for the PC.

By pressing the MENU button on the remote control a menu window

will appear on screen, this allows the settings to be adjusted.

To adjust the Picture settings select picture using the e or d buttons

on the remote then the1 button to enter the following picture

settings menu.

Press the 1 or 2 buttons to adjusted the Picture brightness

and the same to adjust the contrast of the picture.

Picture position changes the picture horizontally or vertically. Press

the1 button to enter the sub menus, adjustment is carried out

using the1 or 2 buttons on the remote control.

Video adjust changes the Phase and the clock of the screen. If the

picture is blurred or grainy this function will adjust it to a clearer

picture, adjustment is carried out using the 1 or 2 buttons on

the remote control.

Auto Adjust will automatically adjust the picture by using the

1 button.This will change all the above settings automatically.

Auto adjust can also be achieved by pressing the /recall

button on the remote control without having to select the menu (not

included in DVI mode)

Resolution displays the current resolution of the picture. This is for

information only and cannot be adjusted.

White tone: Using the 1or2 buttons it is possible to adjust

the colour tone of the picture using the White tone Red(R) / Green

(G)/ Blue(B). This will adjust the picture to show more or less of the

chosen colour. For example if red is selected you can adjust the pro

portion of red in the picture to increase or decrease using the 1

or 2 buttons

Native Resolution is used when the PC can output WXGA 1366 x

768. The setting on your Monitor set can be changed to receive

XGA/WXGA signal using the1 or 2 buttons . Once the native

resolution has been selected, save the settings by switching the

monitor off then on using the standby button.

For Sound settings refer to previous menu

Setting: Press the menu button on your remote and using the e or

d buttons to select Settings. The 1 button will enter the settings

menu.

Timer and AV2 settings are the same as in all other input modes

(pg 7).

Power save if turned ON will switch the monitor into Powersave

mode after 1 minute if no signal is detected, the LED light will turn a

brighter blue to indicate stand by. The monitor will automatically turn

back on when a signal has been detected (PC input / RGBHV).

Use1 or 2 buttons to select power save ON or OFF.

MENU OPERA

TION

: Select

: Adjust

: Exit

Setting

OSD Language English

Timer

AV2 setting Y,Pb,Pr/RGB, H/V

Text Language Greek/ East/West/ Cyrillic

Setting menu

Timer

TIMER 5 ~ 120

: Select

: Adjust

: Exit

PC menu settings

Main Menu

Picture

: Select

: Adjust

: Exit

Setting

Sound

Picture

: Select

: Adjust

: Back

Brightness

ntrast

Position

Video Adjust

Auto Adjust

Resolution

White Tone R

White Tone G

White Tone B

1024 X 768 @60Hz

Native Resolution

XGA / WXGA 1366 x 768

: Select

: Adjust

: Exit

Setting

OSD Language English

Timer

AV2 setting Y,Pb,Pr/RGB, H/V

Power save ON/ OFF

Sound menu

Sound

Volume

Balance

Bass

Treble

Preset Personal / Talk / Music / Normal

Surround OFF / Mid / Max

: Select

: Adjust

: Back

1 2 3 4 5 6 7 8 9 10 11 12 ... 63 64

Comments to this Manuals

No comments

Sanyo CE42LE1 User Manual Page 7

Comments to this Manuals