Sanyo Xacti ICR-EH800D Instruction Manual download pdf (Page 45)

Turn on the power.

Turning on the power (page 22)

Slide the LINE/MIC switch to LINE.

Changing the recording mode (page 87)

Start playing the external sound source,

and press the REC button on the unit to

start recording.

• The recording will be stored in the LINE (L)

folder.

• For recording from external input, the recording

level on the unit cannot be adjusted.

• Before the real recording, ﬁrst test it so that

you can adjust the external device for desired

quality.

If the sound volume is too high, cracking sound

will occur.

To stop recording, press the STOP/BACK

button. Also, stop playback on the

external device.

• If the sound volume on the external device has already been set to its maximum but yet

the sound in line-in recording is small, slide the LINE/MIC switch to MIC and adjust the

recording level, then perform recording again. In this case, recording will be saved in the

selected microphone folder (A to D). (

page 17)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 137 138

No comments

Sanyo Xacti ICR-EH800D Instruction Manual Page 45