Sanyo HEC-DR7700C User Manual download pdf (Page 12)

2221

MASSAGING (MANUAL COURSES)

Adjust the height, width, speed, and strength of the massaging rollers.

There are some adjustments which are not possible, depending on the type of massage chosen.

(See page 23)

Adjusting the height of massaging rollers.

The approximate position of the massaging rollers

is indicated by the lamp on the remote control.

Refer to page 23 for details of the contents of massage.

For grasping shoulder massaging and spine stretching, shoulder

position is first measured. When the position of shoulder is not

correct, adjust the position of massaging rollers. (See page 18)

During massaging operation, the operation can be changed to

other manual massage, Whole Body Sensor Automatic Course or

Automatic Course.

It is possible to operate the upper body massage and lower body

massage simultaneously.

＊

The massage will not start without pressing MANUAL button, even if

the MANUAL (UPPER BODY) MASSAGING buttons are pressed.

(In such a case, the MANUAL button flickers five times.)

Massaging of upper body

The massaging rollers are moved to the upper position and are stopped automatically approx. 15 minutes

after starting the operation. The buzzer sounds and the lamp on the remote control will turn off.

If a different course button (manual) is pressed during the course of operation, the massage will be

completed by operation of the timer approx. 30 minutes after starting the massage selected first.

Adjusting the width of the massaging rollers.

Press the button.

The width of the massaging rollers will

change each time the button is pressed

and is indicated by the lamp on the

remote control. (in five stages)

Press the button.

Adjusting the movement speed of massaging rollers.

Press the button.

The speed of the massaging rollers will change

each time the button is pressed, and is indicated

by the lamp on the remote

control. (in five stages)

Adjusting the strength of the massage.

Press the button.

The strength of the massage will change each

time the button is pressed, and is indicated by

the lamp on the remote

control. (in five stages)

The massaging rollers will move up if the UP( )

button is pressed continuously and move down

if the DOWN( ) button is pressed continuously.

Press the desired MANUAL (UPPER BODY)

MASSAGING button.

■

Finishes the massaging automatically by timer operation.

Press the MANUAL button.

MANUAL button

MANUAL (UPPER BODY)

MASSAGING buttons

Open the cover of the remote control.

Cover

Post

Hook

Post

Hook

When the button is pressed, the lamp of the remote control illuminates and the sole warmer

will turn on.

When the foot rest is fully lowered, the foot rest will rise a little.

When the massaging rollers are not located in the upper section, the massaging rollers will

move to the upper section and stop.

(During the movement, the characters of "ORIGIN" on the remote control flicker.)

Press the OPERATION ON/OFF button.

Sole warmer will be turned on or off each time the SOLE WARMER button is pressed.

(The button is illuminated while the sole warmer is on.)

If you feel that the sole warmer is too hot, turn it off by pressing the SOLE WARMER button.

Adjust the positions of the back rest and the foot rest. (See page 13-15)

Turn the sole warmer on or off.

＊

When the room temperature is low such as in winter, it takes some time to warm up or you

may barely feel warm.

＊

If an excessive force is applied to the cover, it may be

detached. In such a case, re-attach the cover according

to the following procedure.

① ②Place the hook on the underside of

cover around the post

on the underside

of the remote

control.

Slide the hook on the upper side of

cover around the post on the upper

side of the remote control until you

hear a clicking noise.

How to attach the cover

If you have felt abnormal physical sensation or want to stop the massager immediately

To stop the massage during massaging operation.

Press the OPERATION ON/OFF button.

The massaging that corresponds to the pressed

button will stop.

(The Massaging rollers will stop at that point.)

All the massaging will stop and the chair will be

automatically brought to its home position.

(The massaging rollers are moved to the upper

position and remain in that position.)

Press the INSTANT STOP button.

All the massaging will stop and the lamp of the remote control

will turn off.

When you want to restart massaging, press the OPERATION

ON/OFF button. (The massaging rollers move to the upper

position and remain in that position.)

After the movement, repeat the operation from the beginning

of each massage.

Press the button for the current operation.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Sanyo HEC-DR7700C User Manual Page 12

Comments to this Manuals

Related products and manuals for For the car Sanyo HEC-DR7700C