Sanyo MDF-793AT User Manual download pdf (Page 6)

PRECAUTIONS FOR SAFE OPERATION

Select a level and sturdy floor for installation. This precaution will prevent the unit from tipping.

Improper installation may result in water spillage or injury from the unit tipping over.

Connect the unit to a power source as indicated on the rating label attached to the unit. Use

of any other voltage or frequency other than that on the rating label may cause fire or electric shock.

When removing the plug from the power supply outlet, grip the power supply plug, not the cord.

Pulling the cord may result in electric shock or fire by short circuit.

Never damage or break the power supply plug or cord. Do not use the supply plug if its cord

is loose. This may cause fire or electric shock.

Do not touch any electrical parts such as the power supply plug or any switches with a wet hand.

This may cause electric shock.

Do not put a container with water or heavy articles on the unit. It may cause injury if the articles

fall. Current leakage or electric shock may be resulted form the deterioration of insulation by spilled

water.

Do not climb onto the unit or do not put articles on the unit. This may cause injury by tipping or

damage to the unit.

Do not put glass bottles or cans into the compartment since they may be broken by frozen

contents and cause injury.

Put on dry gloves when you take out refrigerated articles from the freezer. Handing frozen

contents or the inside walls with naked hands may cause frostbite.

Do not defrost inside walls using a knife or ice pick. There are pipelines for cooling behind the

walls. Be careful not to damage the lines as this could cause a breakdown. Also, do not make a

hole in the wall for installation of attachments.

Always hold the handle when closing the door. This will reduce the likelihood of a trapped finger.

Check the filter mentioned in this manual and clean it as necessary. A dusty filter may cause

temperature rise or failure.

Check the setting temperature when starting up the operation after the power failure or power

off. A change of set temperature may cause damage to contents.

CAUTION

1 2 3 4 5 6 7 8 9 10 11 ... 29 30

No comments

Sanyo MDF-793AT User Manual Page 6