Sanyo POA-LN01 User Manual download pdf (Page 22)

This chapter describes basic operations and settings for controlling the monitor via a net-

work

using this product. It is required that computer and monitor are connected to the net-

work and the network address be properly configured.

1 Enter the IP address

Launch the web browser installed in your

compu

ter, enter the IP address into the

"Address"

on the browser and the press the

“Enter” key.

Enter the IP address that you configured in chapter “Network Configuration” on page 13. The

default IP address is [192.168.0.2].

Basic Setting and Operation

2 Login

If the setting page has set the password, the authentication window will appear. In this

case

type "user" onto the User Name text area and the login password onto the

Passwor

d text area and then click OK button. If you check the item “Remember my

password”, you can login without entering the password for the next login.

* The entering User Name must be "user" and it cannot be changed.

[Note]

When accessing the monitor at first time or

setting the no password [0000], the auto-

setting page is displayed.

Important

If you have forgotton current

network configuration(IP

address, subnet mask, pass-

word DNS, and default gateway,

you can set them to default

value via serial port (RS232C)

Refer to page 42

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

No comments

Sanyo POA-LN01 User Manual Page 22