Sanyo DCDA1160 Datasheet download pdf (Page 7)

-5-

To start play from the desired track

Select the track by using the e or f button, then press the i but-

ton.

Temporarily stopping play

Press the i button. Current track number blinks on the display. To

resume play, press the button again.

Skip play

To skip to track 6 while track 3 is playing, press the e button repeatedly

until “6” appears (in the track section) on the display. To skip back to track 3

while track 6 is playing, press the f button repeatedly until “3” appears.

Search (forward/reverse)

If the e or f button is pressed during play, the player will search at

high speed in the forward or reverse direction while the button is being

pressed. When the button is released, normal play will continue.

Repeat play (Remote control only)

Press the FM MODE/REPEAT button before or during play.

Press the button once, “REPEAT” blinks, repeat single track.

Press the button twice, “REPEAT” remains, repeat all the track or all the

programmed track.

To cancel repeat play, press the button again, “REPEAT” disappears.

PROGRAMMED PLAY (USING THE MAIN UNIT)

Up to 16 tracks on a disc can be programmed for play in any order.

- First, select “cd” function and load a disc that you want to programme.

- The tracks must be programmed in the stop mode.

- The same track can be programmed more than once.

1. Press the MEMORY button on the

main unit.

2. Select a track by using the e or

f button.

- “MEMORY” keeps on blinking without stopping if you have any inter-

ruption after step 2.

3. Press the MEMORY button.

4. Repeat steps 2 - 3 to programme additional tracks.

5. Press the i button to start programmed play.

When all programmed tracks have been played, the player stops au-

tomatically.

- To cancel programmed play, press the STOP/n button twice.

- The programmes will be released when changes to other functions,

or after the disc compartment is opened, or after the power turned off.

Checking the programme

Each time the MEMORY button is pressed in the stop mode, the pro-

grammed details sequentially appear on the display.

Changing a programme

To add a new track to a programme:

1. In the stop mode, press the MEMORY button repeatedly until “- - ”

appears on the track number section.

2. Select a track by pressing e or f button.

3. Press the MEMORY button.

To change a track:

1. In the stop mode, press the MEMORY button repeatedly until the track

number to be replaced is displayed.

2. Select a track by pressing e or f button.

3. Press the MEMORY button.

Note:

Programmed details cannot be partially deleted or inserted.

MEMORYREPEAT

MHz

kHz

BASS

SLEEP ST

MEMORYREPEAT

MHz

kHz

BASS

SLEEP ST

LISTENING TO TAPE

1. Press the FUNCTION button to select

“TAPE”.

2. Press the STOP/EJECT button to open

the cassette holder.

3. Load the cassette.

After loading the cassette, push the cas-

sette holder (PUSH TO CLOSE portion)

back into position.

4. Press the PLAY button to begin playback.

5. Press the STOP/EJECT button to stop

playback at any time. Press it again to

remove the cassette.

When the end of the tape has been

reached, automatic stop will be activated.

Note:

- Use the normal tape (TYPE 1).

- Endless tapes cannot be used.

- Do not use C-100 (or longer) tapes. They may jam in the mechanism.

Pause

Press the PAUSE button to temporarily stop playback or recording. Press

it again to resume operation.

Fast forward and rewind

Press the FFWD or REW button. When the desired location has been

reached, press the STOP/EJECT button.

LISTENING TO THE RADIO

Automatic/Manual tuning

1. Press the FUNCTION button to select “TUNE”. The radio frequency

appears.

2. Select the desired radio band with the TUN/BAND button.

3. Automatic tuning

Press the TUN + or TUN – button for at least 1 second to tune in a

station. The unit will scan up or down the band and receive the next

receivable station. Press the button again to continue.

- The e or f button on the remote control can also be used.

Manual tuning

Press the TUN + or TUN – button

briefly until the desired frequency is

displayed.

MEMORYREPEAT

MHz

kHz

BASS

SLEEP ST

1160UK(En)P1-10 03/31/2005, 10:35 AM5

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Sanyo DCDA1160 Datasheet Page 7

Comments to this Manuals