Sanyo 42LM4RTC User Manual download pdf (Page 7)

STARTING THE DRIVER CONTROL PROGRAM

Connect the touchscreen cable to a free serial port of the.

1. If the Touchscreen control panel is not already running, start the driver by clicking the icon on

the desktop or select the Windows™ START button and RUN "Ma7_Control_En.exe" with the

necessary path or double click Ma7_Control_En.exe from ‘Windows Explorer™’ or click the

short cut placed on the desktop.

When the program is started it displays the following window (Fig 1):

Fig 1

CONFIGURING THE COMMUNICATIONS PORT

When the program has loaded:

1. Select the Comms tab.

2. Select the comm port the Touchscreen is connected to.

3. Make sure the driver box called 'Present' is red and select the appropriate port that the

touchscreen is connected to.

4. Select a Baud rate of 19,200.

5. Tick the 'Open' box in the Status section.

6. When the driver recognizes the screen, the Open, Active and Valid boxes will go red (fig 2).

7. The button called Reset will reset the touchscreen driver when pressed.

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

No comments

Sanyo 42LM4RTC User Manual Page 7