Sanyo MP3 User Manual download pdf (Page 5)

-5-

Note:

- Do not use an USB hub or USB extension cable

(Operation is not guaranteed). Use only the supplied

USB cable for connection.

- When you connect the player to the PC for the first

time, it sometimes may not be recognised as a

Removable Disk. In this case, disconnect the player

and reconnect it again.

1. Turn on your PC and Windows is started.

2. If the player is turned on, press [a/n z] (for at least 2

seconds) to turn the player off.

3. Connect the player to the PC with the USB cable.

When the player is connected to the PC, it automatically

enters to the battery charging mode.

“ ” is displayed on the display while charging. When

the charge is completed, “ ” appears.

- Fully charge the battery before using the player for the

first time.

- The battery is fully charged approximately 4 hours.

How to connect the player to your PC

Selecting the action Windows is to take (Windows

XP only)

After connection, the following screen will appear.

Adjust your settings to match your PC’s environment.

In this manual, [Take no action] is selected, [Always do

the selected action] is checked, and [OK] is clicked. This

completes the connection to the PC.

- For WindowsME/2000, this operation is not needed.

When connected to the PC, the player display will be as

shown below and none of the operating buttons will work.

Before disconnecting the player from the PC, be sure to

follow the steps on page 8. Do not disconnect during data

transfer.

3) Click

1) Select

2) Check

Pay attention to the

direction of the terminal

Original USB cable

(supplied)

Connected to PC Transmitting to/from PC

Stop Moving

1 2 3 4 5 6 7 8 9 10 ... 23 24

Comments to this Manuals

No comments

Sanyo MP3 User Manual Page 5

Comments to this Manuals

Related products and manuals for MP3/MP4 players Sanyo MP3