Sanyo PDP-31H1ENV User Manual download pdf (Page 20)

BASIC OPERATION

Connect the Plasma Monitor's AC Power Cord into an AC outlet .

TURNING ON / OFF PLASMA MONITOR

Complete the peripheral connections (with Computer, VCR, etc.)

before turning on Plasma Monitor. (Refer to "CONNECTING

PLASMA MONITOR" on Pages 13~15 for connecting that

equipment.)

MAIN ON/OFF

switch

NOTE :

When “Power Save” function is set to “Yes” , Plasma Monitor detects signal interruption and turns off Plasma Monitor

automatically. Refer to “Power Save” on page 30.

On-Screen display and On-Screen menu disappear after a short while for prevention of afterimage (ghost) on screen.

Press MAIN ON/OFF switch on Front Control of Plasma Monitor

to turn ON. POWER indicator will light up(green) when Plasma

Monitor is ON. Press MAIN ON/OFF switch again to turn OFF.

NOTE: When you are operating POWER ON-OFF button on

Remote Control Unit, turn the Plasma Monitor ON with

MAIN ON/OFF switch on the Plasma Monitor first. This is

the master switch of the Plasma Monitor. Remote Control

Unit does not work if this switch is OFF. POWER

indicator lights in red when Plasma Monitor power is

OFF(standby mode) with Remote Control Unit.

When MAIN ON/OFF switch on the Plasma Monitor is ON, you

can turn power ON/OFF by POWER ON-OFF button on Remote

Control Unit. When Plasma Monitor power is turned OFF with

Remote Control Unit, POWER indicator lights in red (standby

mode) .

VOLUME

INPUT

ON-OFF

VOLUME

PC/RGB

COMPONENT

VIDEO

POWER indicator

green:ON

red :OFF(standby mode)

POWER

ON-OFF

button

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

No comments

Sanyo PDP-31H1ENV User Manual Page 20