Sanyo 1AA6P1P1756 User Manual download pdf (Page 7)

ASSEMBLE STORAGE SPACES

Replace the Back Cover to the Top Cabinet. Turn

the Back Cover over, and fix the cover in the

reverse to the initial position.

Replace Back Cover

Back Cover

Screws (14 pcs)

IInsert the Shelves' Pins into appropreate position

of the walls of Storage Spaces. Install the

Compartment Shelves in Storage Spaces.

1. Remove the Hinge Covers by removing the 2

screws of each Hinge.

2. Hold the Glass Doors between the Glass Hinges

and the Hinge Covers. Install the Glass Doors so

that the side with the Holder Magnet is matched

to the magnet inside of the Storage Spaces. Do

not install the Glass Doors in the reverse.

Tighten the screws and fix the Glass Doors.

1. When adjusting the position of the Glass Doors,

loose the Screws(A) and move the Glass Doors

with the Hinges to the arrow direction until the

surface of the door matches to the surface of the

Cabinet Front.

2. When adjusting the tilt of the Glass Doors, adjust

the Screws(B) (lower and upper) and move the

Glass Doors.

Install Glass Doors

Adjustments of Doors

Install Compartment Shelves

Holder Magnet

Screws

(2pcs x 4)

Glass Door

Screw(A)

Screw(B)

Shelves' Pins

(4 pcs X 4)

Compartment

Shelves (4 pcs)

Holder Cover

1 2 3 4 5 6 7 8

No comments

Sanyo 1AA6P1P1756 User Manual Page 7