Sanyo VA-50LAN User Manual download pdf (Page 2)

1. Installing the Option Board

Remove the dome cover and then the lens assembly. Place the dome cover back once you have finished the settings.

• Please refer to the Installation Manual supplied with the camera.

Connect the option board pin connector to the

COM/NET terminal located at the reverse side of

the lens assembly.

Fit the spacers on the option board into the lens

assembly (2 places).

Fix the option board from the reverse side using

the screws supplied with the option board

(3 places).

Remove the drop-prevention cord and secure it

together with the supplied fixer (blue) using a

screw.

Draw the LAN cable through the hole at the

bottom of the camera unit.

Set the lens assembly back to the camera unit.

LAN port

Spacer

Screw

Lens assembly

Spacer

Drop-prevention cord

Fixer (blue)

LAN cable

Note: Confirm that the COM switch on the lens assembly is turned to “N”.

CN407

COM/NET

L9EAU_WA(VA-50LAN_INSTALLATION).book 2 ページ２００６年２月９日　木曜日　午後７時２９分

1 2 3 4 5 6 7 ... 59 60

No comments

Sanyo VA-50LAN User Manual Page 2