Sanyo HT32744 User Manual download pdf (Page 9)

This is the best option for picture and sound! Using the

HDMI connection, which has high-definition content pro-

tection, provides you with uncompressed digital video and

audio, Dolby Digital 5.1 or PCM sound. This connection

requires only one cable.

As Real As It Gets!

CONNECTING EXTERNAL EQUIPMENT TO

HDMI (INCLUDES HDCP COPY PROTECTION)

To avoid problems with some brands of external equip-

ment, follow this procedure when connecting cables and

powering on your equipment.

What you will need for connections:

19 Pin HDMI Digital Cable – 1

(Make sure you check the pin configura-

tion of the cable plug-end*)

*Adapter may be required. Check with

your local electronic store.

DIGITAL AV CONNECTIONS

Remote Control

Set-Top Box (Can be a Digital Satellite Receiver,

DVD Player or similar digital device.)

Back View of TV

Switch off DT V and external equipment before con-

necting cable.

(Cable is not supplied.)

Connect the external equipment’s high bandwidth

HDMI Output to the DTV’s HDMI input.

The DTV must be turned on first, press POWER. Then

turn on your external equipment.

Press INPUT to select

HDMI to view a digital

program.



If the television HDMI pin configuration is different from the pin config-

uration on your set-top box, you will need to use an Adapter.



Press the INPUT key after connecting cables to access the AV Inputs.

There is NO need to tune to a blank channel.



With a DVI connection, make sure you connect Audio out to the TV’s

Compo 3 Audio in.



Because the Component (Compo 3) audio jacks are used to receive the

audio from the DVI device, the Compo 3 video jacks cannot be used

when a DVI device is connected.

HDMI Cable (Gently insert

cable into TV HDMI input

jack.)

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

CONNECTING STB WITH DVI OUTPUT TO

HDMI INPUT (OPTIONAL)

Switch off TV and external equipment before con-

necting cable.

(Cable is not supplied.)

Connect the STB’s DVI Output to a “DVI to HDMI

Cable;” then connect the cable to the DTV’s HDMI

input.

NOTE: Check with your local electronic store for a

DVI to HDMI Cable that matches your equipment

and the DTV.

Connect the STB’s Audio L / R to the DTV’s Compo-

nent Audio 3 L / R.

The DTV must be turned on first, press POWER. Then

turn on your external equipment.

Press INPUT to select HDMI to view a digital program.

Back View of TV

Remote Control

Set-Top Box (Can be a Digital Satellite Receiver,

DVD Player or similar digital device.)

What you will need for

connections:

DVI to HDMI Cable – 1

Audio Cable – 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 61 62

Comments to this Manuals

No comments

Sanyo HT32744 User Manual Page 9

Comments to this Manuals