Sanyo DSR-3706PA User Manual download pdf (Page 26)

English

Searching for recorded video

25 How to use

Press the SEARCH button during recording or live

video.

Turn the J-dial, select "MOTION DETECTION

SEARCH", and turn the S-dial clockwise.

The <MOTION DETECTION SEARCH 1> screen

appears.

The "SEARCHING" starts blinking.

☞ Press the SEARCH button to cancel the search

mode.

Operation returns to the normal screen.

Turn the S-dial clockwise.

The "ALARM" starts blinking.

Select the desired recording area (example: ALARM

& NORMAL) by turning the J-dial, and then turn the

S-dial clockwise.

Selections: ALARM/NORMAL/ALARM & NORMAL

"SEARCHING" of END starts blinking again, the search

is over.

Select CHANNEL by turning the J-dial and then turn

the S-dial clockwise.

The "– –" starts blinking.

Select the desired channel (example: camera 4) by

turning the J-dial, and then turn the S-dial

clockwise.

The cursor moves to the START PREVIEW field.

Turn the S-dial clockwise.

The screen switches to the <MOTION DETECTION

SEARCH 2> screen, and the channel 4 preview screen

is displayed.

Turn the S-dial clockwise, and set the number using

the J-dial. Turn the S-dial clockwise again, and

repeat this to set the date and time for the start of

the search.

Example: October 28, 2006 8:30pm

When the settings are complete, turn the S-dial

clockwise.

Repeat the same steps as shown at 8 to set the

end date and time for the search.

Example: November 29, 2006 8:30pm

The cursor moves to the MOTION SENSOR field.

Turn the S-dial clockwise.

The motion sensor setting screen is displayed.

Setting the motion sensor

1 Turn the J-dial to move the cursor to the desired

position of the sensor, and then turn the S-dial

clockwise.

–: Sensor is not set

ú: Sensor is set

After switching the sensor from unset to set, the

same operation can be used to set sensors at other

locations.

2 Turn the J-dial to move the cursor to "LEVEL:

OFF", and then turn the S-dial clockwise.

The "OFF" starts blinking.

Selections: OFF/1/2/.../9/10 (low sensitivity)

3 Turn the J-dial to set "LEVEL: OFF" to [5], and

then turn the S-dial clockwise twice.

The <MOTION DETECTION SEARCH 2> screen

returns.

For searching the "PREVIEW" or "VIEW" screens,

continue at P26 without exiting the current search.

Press the SEARCH button to exit the search mode.

The normal live video display returns.

E Motion detection search (continued)

(J)

(S)

SEARCH FROM : ALARM

START : 01-01-06 00:40

END : 05-01-06 10:17

CHANNEL : --

START PREVIEW ->

MOTION DETECTION SEARCH

CHANNEL : --

START PREVIEW ->

START :

28-10-06 20:30

If you set the motion search to a specific channel

(camera number), only the video from the specified

channel will be played. The camera title, date and time

may not be displayed fully on the screen.

END :

29-11-06 20:30

SEARCH FROM : ALARM & NORMAL/ CHANNEL : 4

START :

28-10-06 20:30

END :

29-11-06 20:30

MOTION SENSOR ->

PREVIEW ->

VIEW ->

MOVE:JOG SELECT:SHUTTLE

- - - - - - - - - -

LEVEL : OFF EXIT

- - - - - - - - - -

- - - - - -

- - - - - - - - - -

LEVEL : 5 EXIT

(S)

(J)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 87 88

Comments to this Manuals

No comments

Sanyo DSR-3706PA User Manual Page 26

Comments to this Manuals

Related products and manuals for Video recorders Sanyo DSR-3706PA