Sanyo VCC-WB2000 User Manual download pdf (Page 36)

Alarm Setting

The camera is equipped with two types of alarm function: an external alarm sensor and a motion

sensor. When an outside intruder is detected, these alarm functions can be used to record the images

immediately before the alarm occurred (pre-alarm recording) and the alarm images themselves

(post-alarm recording) into the camera’s internal memory or onto a memory card.

When an alarm is received, the ALARM indicator illuminates red on the live image screen, so that you

can check if an alarm is being received or not.

External Alarm Sensor Settings

Make the following connections.

When using this unit, the supplied clamping

core A must be installed on the power cord,

in order to prevent electromagnetic

interference to the other devices connected.

Connect an infrared sensor or similar to

the ALARM IN terminal at the rear of the

camera.

Connect a buzzer or lamp to the ALARM

OUT terminal.

Click the [ALARM] button in the main

menu.

The ALARM SET screen will be displayed.

Change the EXTERNAL ALARM setting to

“ NC” or “ NO” .

You can then select the items that are

required for setting external alarms.

Note: Set MOTION DETECTOR to “OFF”.

PC CARD

RS-232C

ALARM IN OUT

MODEM

COM

AC24V

DC12V

GND

1 2

ETHERNET

POWER

MONITOR

OUT

Infrared sensor or similar

Buzzer or lamp

CLASS 2 WIRING

ID3

L5AB2/US (VCC-WB2000) GB 2002, 7, 4

English

– 35 –

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

Comments to this Manuals

No comments

Sanyo VCC-WB2000 User Manual Page 36

Comments to this Manuals

Related products and manuals for Cameras Sanyo VCC-WB2000