Sanyo ECD-T1535 User Manual download pdf (Page 7)

The adjustment mode will change in the following order:

By pressing VOL button + (11) or VOL button – (12), it is possible to adjust the

desired sound level.

• LOUDNESS

Press BND/LOU button (13) for several seconds to reinforce the bass output and

display will show “LOUD”. Press it for several seconds again to release this function.

• SET THE CLOCK

Press the DSP button (15), the clock is shown on the LCD display. Then hold down

the button until the clock flashes. Then press the MANU/SKIP

button (17) to

change hours or MANU/SKIP button

(16) to change minutes.

• SELECT MODE

Press MOD button (6) shortly to choose desired listening mode.

[e.g. radio mode to CD mode to AUX mode]

• MUTE

Press MUT button (3) to mute the sound instantly. If any button is pressed in the

mute state, the mute mode is released.

• LIQUID CRYSTAL DISPLAY

Exhibit current frequency and activated functions on the display (8).

• EQUALIZATION

Press EQ button (19) to turn on equalization function and to select desired audio

mode. There are five kinds of mode as below:

• AUXILIARY INPUT

The unit can be connected to a portable audio player through the AUX IN jack (24).

To hear the input signal, press MOD (6) button several times until the display shows

“AUX”.

• FLASHING LED

If the front panel is not installed in the main unit, the LED (25) will be flashing.

• RESET

RESET button (26) can be activated with either a ball point pen or thin metal

object. RESET button (26) is to be activated for the following reasons:

- Initial installation of the unit when all wiring is completed.

- All the function buttons do not operate.

- Error symbol on the display.

FLAT CLASSICS POP M ROCK M DSP OFF

Volume Bass Treble Balance Fader

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Sanyo ECD-T1535 User Manual Page 7