Sanyo DS31810 User Manual download pdf (Page 14)

PICTURE-IN-PICTURE (PIP) OPERATION

For PIP to function you must connect two signals to the TV. (Use the TV’s 75 ohm input and

A/V inputs.) Connect VCR (or other accessory equipped with a video output jack) to the

TV’s audio video jacks as shown on page 12. If you are using a satellite dish, you must

connect a cable system or antenna with the satellite to use the PIP feature (see page 13).

For operation with Cable Box, see chart on page 15.

USING PIP TO VIEW TWO TV PROGRAMS

Note: The following steps correspond to numbers on the Remote Control art below.

1. Switch VCR and television ON.

2. Press PIP ON/OFF key.

Set VCR to TV mode, if necessary.

3. Select channel for big window.

4. Press SELECT key to select Video1 or Video2 screen.

5. Press VCR key.

Note: If the remote control cannot be programmed to operate

your VCR, you must use the VCR’s remote to perform VCR functions.

6. Select channel on VCR for small window.

USING PIP TO VIEW TV PROGRAM

AND PRERECORDED TAPE

Note: The following steps do not have corresponding

reference numbers on the remote control art.

1. Set TV channel to match output of VCR

(Channel 3 or 4).

2. Insert prerecorded tape into VCR.

3. Press PLAY, if necessary (wait for tape to load).

4. Set VCR to TV mode.

Note: When the remote control is in the VCR mode, the

INPUT/TV•VCR key works like the TV/VCR key

on the VCR.

5. Press SWAP key to view PIP image in big window.

QuickTips

■

PIP window is black

with no picture:

1. Check cable

connections.

2. Make sure VCR is

turned on.

3. Select another

channel on your

VCR.

■

Same picture appears

in Big and Small

windows. Set VCR

to TV mode.

■

To view two TV

programs or watch

a TV program and

prerecorded tape at

the same time, follow

steps on this page and

chart on page 15.

PIP KEYS

■

Use the SWAP key to

exchange programs

between the windows.

■

Use the LOCATION

key to change the

position of the small

window (Top: L /R or

Bottom: L /R).

■

Use the

FREEZE

key to stop the

action.

■

Use the SELECT key

to choose the PIP

video source (Video1,

Video2, or TV RF

Signal).

Need help?

Visit our website at

www.sanyoctv.com

Call 1-800-877-5032

VCR set to VCR mode.

Same image appears in

both windows.

VCR set to TV mode.

Different images appear

in each window.

DVD

AUX

TVVCR

❺

❸

❻

❷

❹

❶

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 71 72

Comments to this Manuals

No comments

Sanyo DS31810 User Manual Page 14

Comments to this Manuals

Related products and manuals for CRT TVs Sanyo DS31810