Sanyo PLV-55WM1 User Manual download pdf (Page 46)

Maintenance and Cleaning

RECOMMENDATION

We recommend avoiding dusty / smoky environments when

operating the LCD Projection Monitor. When using under dusty or

smoky conditions, dust may accumulate on the optical elements

inside the LCD Projection Monitor and the screen surface. This

condition may degrade the quality of a projected image.

When the above symptoms are noticed, contact your authorized

dealer or service station for proper cleaning.

Turn off the LCD Projection Monitor and disconnect the AC

power cord from the AC outlet.

The Air Filter prevents dust from accumulating on the optical elements inside the LCD Projection Monitor. Should the Air

Filter become clogged with dust particles, it will reduce the cooling fans' effectiveness and may result in internal heat

building up and effect on the life of the LCD Projection Monitor.

To clean the Air Filter, follow the cleaning procedures below:

Remove the Air Filter from the Air Filter Holder, and clean the

Air Filter with a brush or a vacuum cleaner.

If the Air Filter is clogged extremely or broken, replace it with a

new one.

Fit the Air Filter back in the Air Filter Holder and then replace it

to the LCD Projection Monitor. Make sure that the Air Filter fits

the place where it should be.

CAUTION

Do not operate the LCD Projection Monitor with the Air

Filter removed. The dust is stuck in the LCD Projection

Monitor and it may degrade the clear picture reproduction

performance.

Replace the right front cover to the LCD Projection Monitor.

Push downward with a forefinger on the Air Filter Holder and

pull the Air Filter Holder off the LCD Projection Monitor.

Remove the Right front cover of the LCD Projection Monitor.

a. Hold right upper side of the cover and slightly pull forward.

b. Hold both sides of the cover and remove it.

Right Front Cover

Air Filter Holder

Pull this

part first.

Air Filter Holder

Air Filter

Cleaning the LCD Projection Monitor

Be sure to disconnect the AC Power cord from the AC outlet before

cleaning the LCD Projection Monitor.

●

Gently wipe the screen and the cabinet with a soft dry clean cloth.

●

When it is heavily soiled, wipe the screen and the cabinet with a

soft cloth dampened with warm water and finish with a soft, dry

clean cloth.

CAUTION

DO NOT USE BENZENE, THINNER, OR ANY VOLATILE

SUBSTANCES TO CLEAN THE LCD PROJECTION

MONITOR. THESE CHEMICALS MAY CAUSE DAMAGE TO

THE PRODUCT.

Cleaning the Air Filter

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

Comments to this Manuals

No comments

Sanyo PLV-55WM1 User Manual Page 46

Comments to this Manuals

Related products and manuals for Data projectors Sanyo PLV-55WM1