Sanyo PLV-55WM1 User Manual download pdf (Page 47)

Maintenance and Cleaning

When the life of the projection lamp of this LCD Projection Monitor

draws to an end, the LAMP REPLACE indicator emits orange light. If

this indicator emits orange light, replace the lamp with a new one

promptly.

LAMP

REPLACE

WARNING

-OFF

This indicator emits orange light

when the life of the projection

lamp draws to an end.

Front Panel

Lamp Replacement

Turn off the LCD Projection Monitor and disconnect the AC plug.

Allow the LCD Projection Monitor to cool for at least 30

minutes.

Loosen 4 screws that secure the Lamp Cover with a

screwdriver and remove the Lamp Cover.

Loosen the 2 screws that secure the lamp with a screwdriver

and pull out the Lamp by grasping the handle.

Replace the Lamp with a new one and tighten the 2 screws.

Make sure that the Lamp is correctly secured into the Lamp

compartment. Refer to p49 for ordering the replacement lamp.

Remove the Left front cover of the LCD Projection Monitor.

a. Hold left upper side of the cover and slightly pull forward.

b. Hold both sides of the cover and remove it.

Connect the AC Power Cord to the LCD Projection Monitor and

turn on the LCD Projection Monitor.

Follow these steps to replace the lamp assembly.

Put the Lamp Cover back and tighten the 4 screws and then

replace the Left front cover.

Reset the Lamp replace counter.

See “Lamp Replace Counter” on the next page .

For continued safety, replace with a lamp of the same

type. Do not drop the lamp or touch the glass bulb! The

glass can shatter and may cause injury.

Allow the LCD Projection Monitor to cool, for at least

30minutes before you open the Lamp cover. The inside

of the LCD Projection Monitor can become very hot.

CAUTIONCAUTION

CAUTION

When installing the new Lamp into the Lamp compartment, make

sure the Lamp socket is securely plugged into the compartment

socket. Improper or loosen socket connection may cause arc

discharge resulting fire hazard.

Left Front

Cover

Screws

Lamp Cover

Handle

Screws

Pull this

part first.

Maintenance and Cleaning

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 59 60

Comments to this Manuals

No comments

Sanyo PLV-55WM1 User Manual Page 47

Comments to this Manuals

Related products and manuals for Data projectors Sanyo PLV-55WM1