Sanyo DMP-692 User Manual download pdf (Page 14)

Sensor-Touch Control Information

All of the controls on the top panel of the main unit, with the exception of the STANDBY/ON

control and the iPod SELECT control, are special ‘Sensor-Touch’ controls. There are no

buttons to ‘push’. When you softly touch one of these ‘buttons’, it will flash 3 times to confirm

it understood the command, and then the system will react accordingly.

Daylight Saving / Standard Time Selection

Note: This adjustment can only be made when the system is in the Standby Mode.

If you are currently observing Daylight Saving Time you should make this adjustment before

you set the actual time. If you are currently observing Standard Time you do not need to make

this adjustment now. Wait until the beginning of Daylight Saving Time.

1. With the system in the Standby mode, touch and hold the

MODE control on the top panel or press and hold the MODE

button on the remote control until the number “1” will briefly

appear above the time display and the DST indicator also

appears. The display will advance by one hour. After a few

seconds the number “1” indicator

disappears but the DST

indicator remains in the display to confirm that the clock is

showing

Daylight Saving Time.

2. At the end of Daylight Saving Time touch and hold the MODE

control on the top panel or press and hold the MODE button

on the remote control. Until the number “0” will briefly appear

above the time display. The display will back up by one hour.

After a few seconds the number “0” indicator and the DST

disappears to confirm that the clock is showing Standard Time.

SETTING & BASIC OPERATION

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 34 35

No comments

Sanyo DMP-692 User Manual Page 14