Sanyo Camcorder VPC-T1496 User Manual download pdf (Page 48)

EN-47

3. If you select [Single] in the previous step, the

figure shown on the right hand side will appear.

 Select the image that you want to print with

the e / f buttons.

 Select the print number (up to 99) with the c

/ d buttons.

 After selecting the desired image and

printing number, press the SET button to

confirm.

4. Select [Exit] with the c / d buttons, and press

the SET button.

5. Select [Print] with the c / d buttons, and press

the SET button to start printing.

6. The printing starts and the figure shown on the

right hand side appears.

 [COMPLETE] will be displayed temporarily,

reminding you that the printing procedure is

finished.

 If an error is detected during the connection

(i.e. a printer hardware problem) between

camera and printer, [PRINT ERROR] will be

displayed.

 If an error is detected during the communication (i.e. wrong setting on the

camera) between camera and printer, [ERROR] will be displayed.

 The image printing may fail if the power to the camera is cut off.

;;

;

1 2 ... 43 44 45 46 47 48 49 50

No comments

Sanyo Camcorder VPC-T1496 User Manual Page 48