Sanyo dc-ht210w User Manual download pdf (Page 25)

Troubleshooting

-24-

Before resorting to maintenance service, please kindly check by yourself with the

following chart.

Symptom Cause(s) Remedy

No Power

The AC power cord is not connected

to the power supply or is not

connected to a power supply securely.

Please check that the AC power

cord is connected securely.

Picture

There is no

picture or the

picture is

distorted.

Video input mode of the connected

TV isn't correctly set.

Video output mode isn't correctly set.

The video cable isn't connected

securely.

Set an appropriate video output

mode.

Press [V-MODE] repeatedly

until the picture becomes normal

again.

Connect the video cable

securely.

Sound

There is no

sound or the

sound is

distorted.

The audio cables aren't connected

securely.

The volume is set at the lowest level.

The sound is switched off.

The disc is in fast forward/rewind

playback.

Connect the audio cables

securely.

Turn up the volume.

Press [MUTE] on the remote

control to switch on the sound.

Press [PLAY/PAUSE].

The remote

control does

not function.

There is no battery in remote

control.

The batteries are out of charge, or

installed incorrectly.

The remote control isn't pointed to

the remote sensor.

The remote control is out of its

operating area.

The unit is shut down.

Insert two AAA/1.5V batteries

in it.

Replace the batteries with new

ones or check the battery polarity

(+or-).

Make sure that the remote

control is pointed to the remote

sensor.

Make sure the remote control is

within the operating area.

Switch off the unit and disconnect

it from the AC outlet. Then power on

the unit again.

The buttons

on the unit

doesn't work.

The unit is being interfered with

static electricity etc.

Switch off and unplug the unit.

Then connect the unit to the AC

supply and switch it on again.

Unable to

play a disc

This disc is placed in the disc tray

in a wrong way.

The rating of the disc is higher than

the rate set in the parental control item.

The unit isn't compatible with the

disc.

The disc is dirty.

Check that the disc is placed in

the disc tray with its label side

upwards.

Reset the settings in the

parental control item.

Place the compatible disc.

Clean the disc.

The player

breaks down

when a USB

drive or

memory card

is inserted

into the

player.

The connected USB drive or memory

card is probably not a certified one.

The player cannot play any uncertified

USB drive or memory card.

In case the player breaks down, turn it off,

disconnect the power cord from the AC

outlet and unplug the USB drive or/and

memory card from the player. Then, power

on the player again. The player will

resume the normal status.

1 2 ... 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments