Sanyo PLV-WF20 Owner's Manual download pdf (Page 35)

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical

positions to conform to your computer.

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer

to the PC Adjust Menu icon.

Use the Point ed buttons to move the red frame pointer

to the AUTO PC adj. icon and then press the SELECT

button twice.

PC ADJUST MENU

Auto PC adj.

To store the adjusted parameters.

The adjusted parameters from the Auto PC Adjustment can be stored in

the projector. Once the parameters are stored, the setting can be done

just by selecting Mode in PC SYSTEM Menu (p.34). See MANUAL PC

ADJUSTMENT on pages 36-37.

✔Note:

•Fine sync, Total dots, Horizontal and Vertical position of

certain computers cannot be fully adjusted with the Auto

PC Adjustment function. When the image is not provided

properly with this operation, manual adjustments are

required. (pp. 36-37.)

•Auto PC Adjustment cannot be operated in Digital Signal

Input on the DVI terminal and “480p,” “575p,” “480i,” “575i,”

“720p,” “1035i,” or “1080i” is selected on the PC SYSTEM

Menu.

•Depending on the condition of signals and the type and

length of cables, the signals may not be properly viewed.

PC Adjust Menu icon

Move the red frame pointer to the Auto PC

adj. and press the SELECT button twice.

“Please wait...” appears while the Auto PC

adjustment is in process.

The Auto PC adjustment function can be operated

directly by pressing the AUTO PC button on the remote

control or the AUTO PC ADJ. button on the side control.

Direct Operation

Remote Control

Menu Operation

Computer Input

AUTO PC button

Side Control

AUTO PC ADJ.

button

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 83 84

Comments to this Manuals

No comments

Sanyo PLV-WF20 Owner's Manual Page 35

Comments to this Manuals

Related products and manuals for Film projectors Sanyo PLV-WF20