Sanyo ECOi User Manual download pdf (Page 32)

Usage

○

The air conditioners listed herein are only for cooling/heating areas used by

people. Do not use the unit for foods, animals, plants, precision machines,

works of art or other objects. Doing so may cause damage to the unit. Do not

use the unit for vehicles or vessels. Doing so may cause unit water leakage

and short circuiting.

○

Please read the Operating Instructions carefully and use the air conditioner

properly.

○

Requires a qualified technician/installer to install the air conditioner.

Improper self-installation may result in water leakage, electric shock or fire.

○

When installing in a small room, take measures to keep refrigerant leakage

within acceptable density limits, as outlined by local/national safety code

requirements.

○

Do not install where inflammable gas may leak or inflammable objects

exist. Do not install where there is any inflammable gas emission, inflow or

leftover, or where carbon fibers are in the air. This could be the cause of fire.

Location

Blocking air intake or outlet can be the cause of trouble including the

loss of air flow power, or short-cycled air emission drawn into the

intake. Be sure to install in an airy place.

Avoid Installation in Highly Humid Locations

(1) Avoid installation where the humidity is excessive. This causes

condensation during cooling.

(2) Installation in a room where the temperature and humidity are

high around the ceiling due to sunlight will result in condensation.

Use insulation or take other preventive measures to block the

sunlight.

Exposure to Oil

Avoid installation where there is exposure to oil or soot (such as in

kitchens or machinery plants). Oil will adhere to the heat exchange.

This will lower heat exchange performance, emit mist, or deform or

damage synthetic resin parts.

Cleaning

After using the air conditioner for several seasons, the insides

become dirty and this results in low performance. In addition to

regular cleaning, a maintenance contract with a service person is

recommended.

Features of Heat Pump Heating

Heating power (kW) indicated in the catalog is based on the following

conditions: outdoor temperature of 47°F (DB) and indoor temperature of

70°F (DB), as specified by ARI. Heating capacity decreases as outdoor

temperature drops. Therefore, if heating power is insufficient due to low

outdoor temperature, use the air conditioner together with other heating

equipment. When heated air rises and collects in a room with a high

ceiling, install an air circulator as well.

Operation Range

Outdoor Air Intake Temperature:

Cooling: 14 ~ 109°F (DB) Heating: - 4 ~ 59°F (WB)

Noise Emissions

The noise emission rate indicated in the catalog shows values (A

scale) measured in an anechoic chamber. In actual installation

conditions, noise emission is generally greater than the indicated

rate due to surrounding noise and echoing.

Odor Emissions

Even though an air conditioner does not contain odor-emitting parts,

discharged air can, in certain conditions, have an unpleasant odor.

This is the result of odorous particles such as ones from smoke,

cosmetics, and foods, affixing themselves to the air conditioner.

Although the odor does not affect the performance, cleaning the air

filter and the inside of the air conditioner is recommended.

Noise Caused by Electromagnetic Waves

When installing near equipment that emits electromagnetic waves,

be sure that the air conditioner does not suffer noise damage.

Remote Control Wiring

For remote control wiring and control wiring between indoor units,

do not install with the power wiring (208/230V) in the same tube nor

wherever power wiring exists. Doing so may cause a malfunction

Do not install an air conditioner in a room where the limit density will be exceeded if refrigerant leaks. The refrigerant (R410A) used by this system is it-

self a safe refrigerant; however, if for some reason the refrigerant leaks and the limit density is exceeded, there is a risk of injury to persons due to a lack

of oxygen. For further information, ask your dealer or consult references such as an engineering manual to ensure you install the air conditioner correctly.

For further information and training or to request additional product catalogs, please contact:

SANYO North America Corporation

Commercial Solutions Division

1690 Roberts Blvd., NW Suite 110

Kennesaw, GA 30144

Phone: (678) 355-6635

Fax: (678) 355-6684

Web: http://us.sanyo.com/hvac

Dealer Network Courses: http://us.sanyo.com/hvac/Dealer-Certification

ECOi Web Based Dealer Training Video: http://us.sanyo.com/hvac/On-Demand-Videos

• Includes ECOi Installation & Commissioning procedures and much more.

ISO Certification

SANYO Electric Air Conditioning Co., Ltd. (Tochigi Japan)

ISO 9001 ISO 14001

Certificate Number: JQ116B Certificate Number: EC00J0303-33

Caution On Installation and Use

Safety Precautions

1 2 ... 27 28 29 30 31 32

Comments to this Manuals

No comments

Sanyo ECOi User Manual Page 32

Comments to this Manuals

Related products and manuals for Heat pumps Sanyo ECOi