Sanyo KHS0951 User Manual download pdf (Page 15)

Operation with the Remote Control Unit (continued)

NOTE

•

This appliance has a built-in 3-minute time delay circuit to ensure

reliable operation. When the operation button is pressed, the

compressor will start running within three minutes. In the event of

power failure, the unit will stop. When the power is restored, the unit

will restart automatically after five minutes.

3. Adjusting the

Fan Speed

A. Automatic Simply set the FAN SPEED selector button to the position.

A microcomputer in the air conditioner automatically controls the fan speed

when the

mode is selected. When the air conditioner starts operating,

the difference between the room temperature and the set temperature is

detected by the microcomputer which then automatically switches the fan

speed to the most suitable level.

Cooling and DRY mode:

When difference between

room temperature and set

temperature is

FAN SPEED

4 °F and over High

Between 4 °F and 2 °F Medium

Below 2 °F Low

Heating mode:

When difference between

room temperature and set

temperature is

FAN SPEED

4 °F and over High

Below 4 °F Medium

, ,or ]

15OI-351-15EG

oi202000

B. Manual If you want to adjust fan speed manually during operation, just set the FAN

SPEED selector as desired. [

NOTE

The above mentioned data make reference to the conditioner operating

when the sensor on the remote control unit is ON. (Refer to temperature

sensor selector). If the sensor on the indoor unit is being used then

actual operation will slightly differ from that described in the above

tables. (

Sign shown on the remote control unit display.)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Comments to this Manuals

No comments

Sanyo KHS0951 User Manual Page 15

Comments to this Manuals