Sanyo KS2462R User Manual download pdf (Page 11)

OI-508-11EG

Using the Remote Control Unit (continued)

Mounting the Remote

Control Unit

When attaching to wall 1) Confirm the indoor unit beeps when the ON/OFF button is pressed at the

wall location where the remote control unit is to be attached, then attach

the holder to the wall.

2) When taking out the remote control unit, pull it from the holder.

When using the remote

•

Point the transmitter on the remote control unit at the sensor on the

control unit indoor unit when operating the remote control unit and the air conditioner.

•

Do not place objects which may block the transmitted signals between

the receiver and the remote control unit.

Securing the remote 1) Attach the holder to the wall with one screw in the upper hole only.

control unit to prevent theft

2) Remove the cover from the remote control unit, and then remove the

batteries. Next, place the remote control unit in the holder.

3) Secure both the remote control unit and the holder to the wall with another

screw through the lower hole.

4) Put the batteries back in the remote control unit, and then replace the

cover.

Press

Hook

Truss-head

tapping screws

5/32 x 5/8 “ (4 x 16 mm)

(supplied)

Remote

control

unit holder

Remote

control

unit holder

Truss-head

tapping screws

5/32 x 5/8 “ (4 x 16 mm)

(supplied)

Holder

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Sanyo KS2462R User Manual Page 11