Sanyo KS2462R User Manual download pdf (Page 19)

OI-508-19EG

Adjusting the Airflow Direction

1. Horizontal The horizontal airflow can be adjusted by moving the vertical vanes with your

hands to the left or right.

CAUTION When the humidity is high, the vertical vanes should be in the front

position during the cooling or drying operation. If the vertical vanes

are positioned all the way to the right or left, condensation may begin

to form around the air vent and drip down.

2. Vertical The vertical airflow can be adjusted by moving the flap with the remote

control unit. Do not move the flap with your hands. Confirm that the remote

control unit has been turned on. Use the FLAP button to set either the

sweep function or one of the six airflow direction settings.

(The maximum capacity is obtained at the position at 4.)

A. Sweep function B. Setting the airflow manually

The flap starts moving up and down to

deliver air over the sweep range.

Referring to the above illustration, use

the FLAP button to set the airflow

direction within the range used during

the cooling or drying operation.

NOTE

•

The flap automatically closes when the unit is off.

CAUTION

•

Use the FLAP button on the remote control to adjust the position of the flap.

If you move the flap by hand, the flap position according to the remote control

and the actual flap position may no longer match. If this should happen, shut

off the unit, wait for the flap to close, and then turn on the unit again; the flap

position will now be normal again.

•

Do not have the flap pointed down during cooling operation.

Condensation may begin to form around the air vent and drip down.



COOL

and

DRY

(Recommended

operating

range)

SWEEP

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

No comments

Sanyo KS2462R User Manual Page 19