Sanyo HT32744 User Manual download pdf (Page 6)

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

NOTES:

The on-screen message for digital search will appear with a

progress bar and percentile number displayed across the

bottom of the screen (to indicate activity) as the search process

continues. (Channel numbers will appear under the progress

bar only when a digital channel is found.)

Channel information found during the channel search is

stored in the Channel Scan Memory database. After the

channel search is completed, the DTV will tune to the lowest

Digital channel or lowest Analog channel if no digital channels

are found.

If the DTV does not detect any

digital or analog channels, a

message advising the viewer

to check the cables and

antenna connections will

appear. In this case, you must

press the CHANNEL UP key

again to repeat the channel

search process. If after two

searches the DTV still fails to detect any channels, the DTV

will tune to analog channel 3. These two channel searches

are necessary even if you plan to use the DTV only as a

monitor.

If no analog or digital channels are found after the second

search, Channel Search will default to off-air analog channels

2 through 69 and digital channel D3-1. Select analog channels

using the remote control keypad. See page 12, item

number 4.

AUTO CLOCK SETTING (Optional)

After channel search is complete, the DTV will begin

Auto Clock setting. This feature searches for a local

PBS station that is broadcasting an extended data

service signal. This signal is used to automatically

set the clock/day. (This may

take several seconds.) To

cancel auto clock setting,

press the CHANNEL UP

key. (To set the clock manu-

ally, see page 23.)

ANTENNA SELECTION (Optional)

To change the initial ANALOG tuning system setup

(from antenna to cable or cable to antenna), use

the on-screen menu. See “Antenna Selection” on

page 19.

INSTALL TWO “AA” BATTERIES

IMPORTANT NOTE: Spent or discharged batteries must be recycled

or disposed properly in compliance with all applicable laws. For

detailed information, contact your local County Solid Waste

Authority.

•

Install two “AA” Batteries (not

included) so that the “+” and “–”

marks on the batteries match

the “+” and “–” marks

inside the Remote.

To review the Remote

functions, go to

pages 12 ~ 14.



Remove the batteries if the remote control will not be used for a

month or more. Weak batteries may leak and cause damage.

(Normal battery life is roughly six months.)



If batteries have leaked in the Remote Control Unit, carefully wipe

the case clean and load new batteries.

CHANNEL SEARCH

When the television is powered on for the first time,

it automatically checks for the presence of an RF

signal.

•

Press the POWER key to turn

on the DTV.

•

Then press the CHANNEL

UP key to automatically

search for available chan-

nels: Digital (ATSC) and

Analog (NTSC).

The Channel Search contains two processes that are

executed simultaneously for digital and analog

channels.

1 2 3 4 5 6 7 8 9 10 11 ... 61 62

Comments to this Manuals

No comments

Sanyo HT32744 User Manual Page 6

Comments to this Manuals