Sanyo SRT-4040DC User Manual download pdf (Page 35)

SINGLE IMAGE RECORDING

The single image recording function of this VCR can be

used to create image data files or animations.

Single Image Recording Setup

1 In stop mode, press the REC/PLAY SPEED l

button, to set the recording speed to “000”.

Press the MENU button to display the MAIN MENU.

Press the l (or j) button to select the

“5.ALARM/SERIES REC SET” line, then press the

ENTER button.

ø The (ALARM/SERIES REC SET) menu

appears.

*ALARM@SET

@@MODE@@@@@@@@@@@Y1

@@SPEED@@@@@@@@@@8H

@@DURATION@@@@@@@20S

*1@SHOT@SET

@@FIELD@@@@@@@@@@1

@@INTERVAL@@@@@@@1M

*SERIES@REC@@@@@@N

*TAPE@END@OUT@@@@8:00

Press the l (or j) button until the “FIELD” setting is

highlighted, then press the ENTER button.

Press the l (or j) button to set the number of fields

(images) to record every time (1, 2, 3, 4, 5, 10, 30,

60), then press the ENTER button.

Press the ENTER button.

Press the l (or j) button to set the interval between

each image recording (1M, 2M, 3M), then press the

ENTER button.

Press the MENU EXIT button.

Press the REC button.

ø The single image recording mode will be

activated (the VCR will be in recording stand-by

mode).

Press the REC button one more time, or send a

trigger through the 1 SHOT IN terminal on the back

panel, to start the single image recording.

NOTE:

œ If a setting other than “1” is selected for “FIELD” at

step 5, recording will be done in 120-hour mode.

The recording speed cannot be modified.

When finished, press the STOP button.

NOTES:

œ The trigger at the 1 SHOT IN terminal should be on

for 0.1 sec. or more.

œ The trigger interval at the 1 SHOT IN terminal varies

according to the number of images to record, but

should be over 1 sec.

œ Alarm recording is not possible during single image

recording.

œ During the “INTERVAL” period set for single image

recording, the WARNING OUT terminal will not be 0 V

even if the “NON REC” on the (WARNING

OUT/CONTROL SET) menu is set to “Y”.

œ If a single image recording trigger is not received (or if

the REC button is not pressed) during the duration set

for “INTERVAL”, single image recording will be

conducted automatically after the set duration.

œ If a single image recording trigger is received (or if the

REC button is pressed) during the duration set for

“INTERVAL”, single image recording will be

conducted immediately.

œ When using the 1 SHOT IN terminal, connect a

make-contact switch (no voltage) between the 1

SHOT IN and COM terminals.

Recording of set number of images

“INTERVAL” setting (1, 2 or 3 minutes)

Input of single

image recording

trigger

Input of single image

recording trigger

NB4QR/NA (SRT-4040 GB) Tue. Sept., 10/2002

English

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 53 54

Comments to this Manuals

No comments

Sanyo SRT-4040DC User Manual Page 35

Comments to this Manuals

Related products and manuals for Video recorders Sanyo SRT-4040DC