Sanyo TLS-224P User Manual download pdf (Page 26)

OUTPUT TERMINALS

TAPE END OUT Terminal

•

During recording, when the end of the tape is

reached or when the tape counter reading indicates 2

hours 57 minutes or more, the output becomes 0V

(Low).

•

During autorepeat recording, when the end of the

tape is reached, the output become 0V (Low) for

about 2 seconds only.

•

To reset the output, press the STOP or EJECT

button.

TAPE END OUT Terminal Output Setting

1 Press the AUDIO ON/MENU button until the (SET

UP 3) menu is displayed.

2 Press the ] button, until the “TAPE END OUT”

setting is flashing.

3 Press the l (or j) button, to select the desired

output mode.

–3M. . . . . . . . . . . . The output become 0 V

(Low) when the tape counter

reaches “2:57:00” and/or

when the tape reaches the

end.

END . . . . . . . . . . . The output become 0 V

(Low) when the tape

reaches the end.

4 Press the PAUSE/SCAN button, the normal screen

is displayed.

WARNING OUT Terminal

•

If the tape stops or other problem, the output

becomes 0V (Low).

•

To reset the output, unplug the power cord then plug

it back in or press the ALL RESET button.

NOTE:

•

If the output is 0V (Low) due to the clog detect

function, it can be reset by simply pressing the STOP

button.

COM Terminal

•

Common GND (ground) terminal when connecting

other terminals to external devices.

Tape end or

5V (H)

0V (L)

(Output impedance: 5.7 kΩ)

Output reset

ALARM MODE Y1

ALARM SPEED 3H

ALARM DURATION 20S

TAPE IN MODE STOP

TAPE END MODE REW

TAPE END OUT -3M

CLOG DETECT. Y

Tape movement stop

5V (H)

0V (L)

(Output impedance: 5.7 kΩ)

Output reset

NE4QG/EX (TLS-224P GB) Mon. May, 11/1998

English

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

Comments to this Manuals

No comments

Sanyo TLS-224P User Manual Page 26

Comments to this Manuals

Related products and manuals for Video recorders Sanyo TLS-224P