Sanyo CAS-D6325 User Manual download pdf (Page 13)

E11

GETTING STARTED

Plug the AC adapter into a standard 120V AC wall outlet.

Plug the modular cord into the TEL LINE jack.

Route the modular cord through the hole of the wall mount bracket as shown.

Plug the modular cord into the telephone wall jack.

Align the mounting slots on the base with the mounting posts on the wall. Then push

in and down until the phone is firmly seated.

Notes:

DO NOT use an AC outlet controlled by a wall switch.

To mount the phone directly on the wall, insert two #10 screws (minimum

length of 1 3/8 inches (34.9 mm), not supplied) into the wall, 3 15/16 inches

(100 mm) apart; leave the screw heads 1/8 inch (3.175 mm) away from the

wall to allow room for mounting the phone. Be sure the wall is capable of

supporting the weight of the phone, and use the proper type of anchoring

device for the wall material. No need to route the telephone cord through the

hole of the wall mount bracket when mounting directly on the wall.

•

Wall plate

AC adapter (supplied)

AC outlet

Route the cord.

Wall plate

AC adapter (supplied)

AC outlet

Route the cord.

UC590EH.indd E11UC590EH.indd E11 8/19/2008 11:39:00 AM8/19/2008 11:39:00 AM

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 60 61

No comments

Sanyo CAS-D6325 User Manual Page 13