Sanyo DSR-2108 User Manual download pdf (Page 39)

LIVE settings

To set the video settings on each channel.

Select an item for each setting using the control button ({|)

and select a setting value using the control button (}~).

● Setting a CHANNEL and the channel designation

Select "CHANNEL" using the control button ({|)

and select a channel from the following channels

using the control button (}~), press the ENTER

button.

Selections: CH1 - CH16

☞ In DSR-2108, CH1 - CH8.

The CHANNEL screen used for channel settings is

displayed.

When not changing the designation of the channel, only

select a channel.

Select the input position using the control button

({|) and select input characters using the control

button (}~).

Character selection: (Refer to "DVR ID input display

list": P80)

Press the EXIT/STOP button once operations are

complete.

Changing the present CH1 display to HALL-1F

(Example).

● Setting the DISPLAY

To select "DISPLAY", and set the screen display.

ON: Displays live videos

OFF: Does not display live videos

Memo: The display of screen information, such as time and

date and channel, depends on the settings of the

OSD. (P31)

● Setting the BRIGHTNESS

To select "BRIGHTNESS" and adjust the brightness of

the videos.

The brightness of the video changes in real time.

(0 - 100 %)

● Setting the CONTRAST

To select "CONTRAST" and adjust optimally the dark

parts and bright parts of the video.

The contrast of the image changes in real time.

(0 - 100 %)

● HUE settings

To select "HUE" and adjust the hue of the video.

The hue of the images changes in real time.

(0 - 100 %)

● Setting the SATURATION

To select "SATURATION" and adjust the saturation of the

video.

The saturation of the images changes in real time.

(0 - 100 %)

Press the EXIT/STOP button once operations are

complete.

Press the EXIT/STOP button repeatedly to return to the live

screen.

Sets the alarm input/output conditions of the alarm input/

output terminal.

Select "ALARM-SET" using the control button

({|) and press the ENTER button.

The ALARM-SET screen is displayed.

Select "ALARM OUT" using the control button

({|) and set whether or not an alarm signal

should be output through this unit using the

control button (}~).

ENABLE: An alarm signal is output.

DISABLE: No alarm signal is output.

Select "ALARM OUT NO." using the control button

({|) and specify the alarm output terminal number

(1 - 4) using the control button (}~).

Sets the alarm output conditions of the specified

alarm output terminal.

● Setting the ALARM IN

An alarm signal is output when the specified external alarm

input terminal receives an input.

1 Select "ALARM IN" using the control button ({|).

2 Select the setting position (4 positions) using the control

button (}~).

3 Select the input terminal number (1 - 16) using the control

button ({|).

☞ In DSR-2108, input terminal number (1 - 8).

4 Press the ENTER button.

● Setting the MOTION ON

An alarm signal is output when the specified video input

terminal receives a MOTION detection signal.

1 Select "MOTION ON" using the control button ({|).

Setting a CHANNEL

CHANNEL

H A L L - 1 F

- - - - - - - -

Alarm input output settings

ALARM-SET

ALARM OUT ENABLE

ALARM OUT NO. 1

ALARM IN -- -- -- --

MOTION ON -- -- -- --

VIDEO LOSS ON -- -- -- --

HDD ERROR OFF

ALARM DURATION 5 SEC

ALARM IN NO. 1

TYPE ---

L8HBT_WA(DSR-2116_2108)(GB).book 32 ページ２００９年５月２７日　水曜日　午後４時５０分

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 91 92

Comments to this Manuals

No comments

Sanyo DSR-2108 User Manual Page 39

Comments to this Manuals

Related products and manuals for Car DVR Sanyo DSR-2108