Sanyo DSR-2108 User Manual download pdf (Page 82)

Remote Setup

This sub menu is accessible from the Network settings.

This setting is used to automatically send a notification e-mail

to a specified address when an alarm occurs, for example.

1 Send E-mail

•ON: E-mail sending function enabled

• OFF: E-mail sending function disabled

2 IP Notification

To send a notification e-mail when the DVR IP address is

changed, check the checkbox.

3 Event Alarm

The alarm event type can be used as condition for sending

notification e-mails.

• OFF (factory default)

Notification e-mail is not sent even if an alarm is

detected.

• ALARM

A notification e-mail is sent when ALARM recording is

triggered by the sensor connected to the external alarm

input terminal (ALARM IN) of the unit.

•MOTION

A notification e-mail is sent when MOTION recording is

triggered by a movement detected by the motion sensor

built into the unit.

•ALL

A notification e-mail is sent when a recording is

triggered either by an external alarm or the built-in

motion sensor.

Memo: Alarm notification requires setting of ALARM-SET.

(P32)

4 Mail Address

Input the destination address.

5 Mail Server settings

Input the SMTP server name as well as the user ID and

password.

6 RETURN MAIL ADDRESS

Set the source e-mail address to be notified to the

destination.

Allows synchronizing the time using an internet or LAN NTP

server.

1 NTP USE

•ON: Synchronize using NTP server

•OFF: Do not synchronize using NTP server

2 NTP Primary Server Address

Input the NTP primary server address.

3 NTP Secondary Server Address

Input the NTP secondary server address.

4 Time Zone

Select the time zone.

(GMT -1:00 to -12:00, GMT 0:00 to 13:00)

5 Interval

Set the time to synchronize.

(01 - 24:00)

Allows to configure continued recording settings by

overwriting the hard disk and the storage period for the

recording data.

1 Overwrite

To continue recording by overwriting when the hard disk

becomes full, check the checkbox.

2 Auto Delete

•ON: Auto-delete function enabled

•OFF: Auto-delete function disabled

3 Auto Delete Days

If auto-delete is set to ON, set a recording data storage

period.

(2/3/4 - 60 DAYS)

Setting the Send E-Mail

The DVR will be forcibly restarted if a value on this

screen is changed.

Setting the NTP

Setting the Storage

L8HBT_WA(DSR-2116_2108)(GB).book 75 ページ２００９年５月２７日　水曜日　午後４時５０分

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 91 92

Comments to this Manuals

No comments

Sanyo DSR-2108 User Manual Page 82

Comments to this Manuals

Related products and manuals for Car DVR Sanyo DSR-2108