Sanyo PJ-NET ORGANIZER POA-PN10 User Manual download pdf (Page 34)

Basic Setting and Operation

● When the internal power circuit is failed:

● When the life span of lamp is reached:

✐ Replace it with a new lamp immediately and reset the lamp counter. If the projector

is used without reset the lamp counter, the alert mail is sent to users in every power-

on of the projector. This alert mail will not be sent when unchecking the mail sending

condition "When the life span of lamp is reached".

TITLE: Message from projector

01-01-2003 00:59

Projector Model Name: XT10A/XT15A

TCP/IP: 192.168.0.2 Projector Name: myProjector

It sends you following massage.

*The Projector lamp was turned off, because projector power circuit failed.

Unplug the projector from AC outlet and ask servicing to qualified service

personnel.

TITLE: Message from projector

01-01-2003 00:59

Projector Model Name: XT10A/XT15A

TCP/IP: 192.168.0.2 Projector Name: myProjector

It sends you following massage.

*The life span of lamp is reached.

✐ The Projector lamp was turned off, because the projector power circuit failed.

Unplug the projector from AC outlet and ask servicing to a qualified service personnel.

● When the lamp use time reaches preselect lamp use time:

✐ The Network Unit sends a free message when the lamp use time reaches the prese-

lected lamp use time. It can be used for preparation of the lamp replacement and the

maintenance required.

TITLE: Message from projector

01-01-2003 00:59

Projector Model Name: XT10A/XT15A

TCP/IP: 192.168.0.2 Projector Name: myProjector

It sends you following massage.

*The lamp use time reaches 800 hours. Prepare the lamp replacement.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 89 90

No comments

Sanyo PJ-NET ORGANIZER POA-PN10 User Manual Page 34